| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001B1M6 |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 -                    
                                       ] |  
                        | Title: LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL; 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ] |  REMOVALCAUTION / NOTICE / HINTThe necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
                     
                        
                        
                        
                        
                     
                     
                        
                           | Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |  
                           | Front bumper assembly | 
                                 
                                    
Measurement of ultrasonic sensor detection angle
Ultrasonic sensor detection angle registration
 | 
                                 
                                    
Intelligent Clearance Sonar System
Intuitive Parking Assist System
 | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for Gasoline Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Front television camera view adjustment | Panoramic View Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for Gasoline Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)  |  
                           | 
                                 
                                    
Headlight assembly LH
Headlight ECU sub-assembly LH
 | Synchronize the vehicle information | Lighting system (for Gasoline Model with Cornering Light) | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon [04/2018 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
                     
                        
                        
                        
                        
                     
                     
                        
                           | Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |  
                           | Front bumper assembly | 
                                 
                                    
Measurement of ultrasonic sensor detection angle
Ultrasonic sensor detection angle registration
 | 
                                 
                                    
Intelligent Clearance Sonar System
Intuitive Parking Assist System
 | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for HV Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)  |  
                           | Front television camera view adjustment | Panoramic View Monitor System | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): CALIBRATION](/t3Portal/stylegraphics/info.gif)  |  
                           | 
                                 
                                    
Headlight assembly LH
Headlight ECU sub-assembly LH
 | Synchronize the vehicle information | Lighting system (for HV Model with Cornering Light) | 
                                 
                                    
                                       
                                          ![2019 - 2022 MY Avalon HV [04/2018 -        ]; LIGHTING (EXT): LIGHTING SYSTEM (for HV Model with Cornering Light): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  |  
                     HINT: 
                        
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
 PROCEDURE1. REMOVE FRONT BUMPER ASSEMBLY Click here
                        
                           
                              ![2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL](/t3Portal/stylegraphics/info.gif)  ![2022 MY Avalon Avalon HV [08/2021 -        ]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL](/t3Portal/stylegraphics/info.gif)  2. REMOVE HEADLIGHT ASSEMBLY (a) Apply protective tape around the headlight assembly as shown in the illustration.   
                     
                        
                        
                     
                     
                        
                           |   | Protective Tape |  (b) w/o Cornering Light: 
                     
                        
                           | (1) Remove the bolt (A) , bolt (B) and 3 screws. | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Bolt (A) |  
                                                | *b | Bolt (B) |  
                                                | *c | Screw |  |  |  (2) Disengage the guide to separate the headlight assembly as shown in the illustration.   
                     
                        
                        
                     
                     
                        
                           |   | Remove in this Direction |  (3) Disconnect the connector to remove the headlight assembly. (c) w/ Cornering Light: (1) Disengage the claw, pull down the connector lock lever as shown in the illustration and disconnect the connector.   
                     
                        
                        
                     
                     
                        
                           | *a | Connector Lock Lever |  
                           |   | Disconnect in this Direction |  
                     
                        
                           | (2) Remove the bolt (A) , bolt (B) and 3 screws. | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Bolt (A) |  
                                                | *b | Bolt (B) |  
                                                | *c | Screw |  |  |  (3) Disengage the guide to remove the headlight assembly as shown in the illustration.   
                     
                        
                        
                     
                     
                        
                           |   | Remove in this Direction |  |