Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AZ8C |
Model Year Start: 2019 |
Model: Avalon |
Prod Date Range: [04/2018 - 08/2021] |
Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model): HOW TO PROCEED WITH TROUBLESHOOTING; 2019 - 2021 MY Avalon [04/2018 - 08/2021] |
HOW TO PROCEED WITH TROUBLESHOOTING
|
CAUTION / NOTICE / HINT
HINT:
*: Use the Techstream.
PROCEDURE
1.
|
VEHICLE BROUGHT TO WORKSHOP
|
NEXT
|
|
|
2.
|
CUSTOMER PROBLEM ANALYSIS
|
(a) Interview the customer and confirm the problem.
Click here
NEXT
|
|
|
3.
|
CHECK DTC AND FREEZE FRAME DATA*
|
(a) Check and record DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here
for Freeze Frame Data: Click here
Chassis > ABS/VSC/TRAC/EPB > Trouble Codes
(b) Clear the DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here
for Freeze Frame Data: Click here
Chassis > ABS/VSC/TRAC/EPB > Clear DTCs
(c) Reconfirm the DTCs.
(1) Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data.
for DTC Check / Clear: Click here
for Freeze Frame Data: Click here
Chassis > ABS/VSC/TRAC/EPB > Trouble Codes
HINT:
-
When CAN communication system DTCs are output, repair the CAN communication system first.
Click here
-
If DTC U0100, U0123 and/or U0126 are among the CAN communication DTCs that are output, first use the Data List to check for a momentary open circuit.
Click here
-
If the Techstream cannot communicate with the skid control ECU (brake actuator assembly), inspect the CAN communication system.
Click here
-
If there is no response from the skid control ECU (brake actuator assembly), inspect the +BS circuit of the skid control ECU (brake actuator assembly).
Click here
Result
|
Proceed to
|
DTCs are output.
|
A
|
DTCs are not output. (Problem symptom does not occur.)
|
B
|
DTCs are not output. (Problem symptom occurs.)
|
C
|
A
|
|
|
4.
|
DIAGNOSTIC TROUBLE CODE CHART
|
(a) Proceed to Diagnostic Trouble Code Chart.
Click here
(a) Proceed to How to Proceed with Troubleshooting.
Click here
NEXT
|
|
|
6.
|
PROBLEM SYMPTOMS TABLE
|
(a) Proceed to Problem Symptoms Table.
Click here
NEXT
|
|
|
NEXT
|
|
|
8.
|
IDENTIFICATION OF PROBLEM
|
NEXT
|
|
|
NEXT
|
|
|
(a) Clear the DTCs.
Click here
Chassis > ABS/VSC/TRAC/EPB > Clear DTCs
(b) Check if the same DTCs are output.
Click here
Chassis > ABS/VSC/TRAC/EPB > Trouble Codes
Result
|
Proceed to
|
DTCs are not output.
|
A
|
DTCs are output.
|
B
|
A
|
|
|
NEXT |
|
END
|
|