| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AZ8A |
| Model Year Start: 2019 | Model: Avalon | Prod Date Range: [04/2018 - 08/2021] |
| Title: BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for Gasoline Model): C1300; Skid Control ECU Malfunction; 2019 - 2021 MY Avalon [04/2018 - 08/2021] | ||
|
DTC |
C1300 |
Skid Control ECU Malfunction |
DESCRIPTION
The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C1300 |
Skid Control ECU Malfunction |
Internal failure of the skid control ECU (brake actuator assembly). |
Skid control ECU (brake actuator assembly) |
PROCEDURE
|
1. |
REPLACE BRAKE ACTUATOR ASSEMBLY |
(a) Replace the skid control ECU (brake actuator assembly).
Click here
![2019 - 2020 MY Avalon [04/2018 - 08/2020]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (for Gasoline Model): REMOVAL](/t3Portal/stylegraphics/info.gif)
HINT:
This DTC is output when the skid control ECU (brake actuator assembly) detects a malfunction in an internal circuit.
(b) Enter the following menus: Chassis / ABS/VSC/TRAC/EPB / Utility / Test Mode.
(c) Perform system variant learning and acceleration sensor zero point calibration.
Click here
Chassis > ABS/VSC/TRAC/EPB > Utility
|
Tester Display |
|---|
|
Test Mode |
(d) Enter the following menus: Chassis / ABS/VSC/TRAC/EPB / Utility / Signal Check.
(e) Perform the sensor check using the Test Mode (Signal Check) procedure.
Click here
Chassis > ABS/VSC/TRAC/EPB > Utility
|
Tester Display |
|---|
|
Signal Check |
| NEXT |
|
END |
|
|