Battery terminal is disconnected/reconnected
|
Perform steering sensor zero point calibration
|
Lane departure alert system (w/ Steering Control)
|
|
Pre-collision system
|
Intelligent Clearance Sonar System*1
|
Lighting System (for Gasoline Model with Cornering Light)
|
Memorize steering angle neutral point
|
Parking Assist Monitor System
|
|
Panoramic View Monitor System
|
|
Replacement of ECM
|
Vehicle Identification Number (VIN) registration
|
MIL comes on
|
|
ECU communication ID registration (Immobiliser system)
|
Engine start function
|
|
Gas leak from exhaust system is repaired
|
Inspection after repair
|
-
Poor idle, etc.
-
Engine start function, etc.
|
|
Replacement of automatic transaxle assembly
|
-
Perform reset memory
-
Input transaxle compensation code into ECM
-
Perform road test to allow ECM to learn
|
-
Large shift shock
-
Deterioration of fuel efficiency
|
for Initialization
for Registration
|
Replacement of ECM
(If transaxle compensation code read from ECM)
|
-
Perform reset memory*2
-
Transfer transaxle compensation code
-
Perform road test to allow ECM to learn
|
Replacement of ECM
(If transaxle compensation code not read from ECM)
|
-
Perform reset memory*2
-
Reset transaxle compensation code
-
Perform road test to allow ECM to learn
|
Replacement of automatic transaxle fluid
|
ATF thermal degradation estimate reset
|
The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly
|
|
Replacement of ECM
|
Code registration (Smart Key System (for Start Function))
|
-
Wireless Door Lock Control System
-
Smart Key System (for Entry Function)
-
Smart Key System (for Start Function)
-
Steering lock function
|
|
Suspension, tires, etc.
|
-
Measure ultrasonic sensor detection angle
-
Ultrasonic sensor detection angle registration
|
-
Intelligent Clearance Sonar System
-
Intuitive Parking Assist System
|
|
Rear television camera assembly optical axis adjustment (Back camera position setting)
|
Parking Assist Monitor System
|
for Initialization
for Calibration
|
-
Parking assist ECU initialization
-
Adjust steering angle
-
Television camera assembly optical axis adjustment (Back camera position setting)
|
Panoramic View Monitor System
|
for Initialization
for Calibration
|
Perform headlight ECU sub-assembly LH initialization
|
Lighting system (for Gasoline Model with Cornering Light)
|
|
Front wheel alignment adjustment
|
Perform system variant learning and acceleration sensor zero point calibration.
|
-
VSC is disabled or malfunctions
-
DTCs are output
-
Slip indicator light illuminates
-
ABS warning light illuminates
|
|