Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AYQH |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: INSPECTION; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] |
INSPECTION
PROCEDURE
1. INSPECT OUTER MIRROR RH
(a) Check the outer mirror heater operation.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
25°C (77°F)
|
10 to 17 Ω
|
If the result is not as specified, replace the outer mirror RH.
|
|
*a
|
Component without harness connected
(Outer Mirror RH)
|
|
|
(b) Check the operation of the outer rear view mirror indicator.
NOTICE:
Do not apply a voltage of more than 4.5 V.
(1) Connect 3 new 1.5 V dry-cell batteries in series.
(2) Apply 4.5 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.
OK:
Tester Connection
|
Specified Condition
|
4.5 V battery negative (-) → Terminal 4
4.5 V battery positive (+) → Terminal 1
|
Outer rear view mirror indicator comes on
|
If the result is not as specified, replace the outer mirror RH.
|
|
*a
|
Component without harness connected
(Outer Mirror RH)
|
|
|
2. INSPECT OUTER MIRROR LH
(a) Check the outer mirror heater operation.
(1) Measure the resistance according the value(s) in the table below.
Standard Resistance:
Tester Connection
|
Condition
|
Specified Condition
|
1 - 2
|
25°C (77°F)
|
10 to 17 Ω
|
If the result is not as specified, replace the outer mirror LH.
|
|
*a
|
Component without harness connected
(Outer Mirror LH)
|
|
|
(b) Check the operation of the outer rear view mirror indicator.
NOTICE:
Do not apply a voltage of more than 4.5 V.
(1) Connect 3 new 1.5 V dry-cell batteries in series.
(2) Apply 4.5 V battery voltage to the terminals of the connector, and check that the outer rear view mirror indicator comes on.
OK:
Tester Connection
|
Specified Condition
|
4.5 V battery negative (-) → Terminal 4
4.5 V battery positive (+) → Terminal 1
|
Outer rear view mirror indicator comes on
|
If the result is not as specified, replace the outer mirror LH.
|
|
*a
|
Component without harness connected
(Outer Mirror LH)
|
|
|
|