Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AYJ8 |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: WIPER / WASHER: WASHER LEVEL WARNING SWITCH: REMOVAL; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during level warning switch assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Front bumper assembly
|
-
Measurement of ultrasonic sensor detection angle
-
Ultrasonic sensor detection angle registration
|
-
Intelligent Clearance Sonar System
-
Intuitive Parking Assist System
|
|
Front television camera view adjustment
|
Panoramic View Monitor System
|
|
Necessary Procedure After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function When Necessary Procedures are not Performed
|
Link
|
Front bumper assembly
|
-
Measurement of ultrasonic sensor detection angle
-
Ultrasonic sensor detection angle registration
|
-
Intelligent Clearance Sonar System
-
Intuitive Parking Assist System
|
|
Front television camera view adjustment
|
Panoramic View Monitor System
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
2. DRAIN WASHER FLUID
Click here
3. REMOVE LEVEL WARNING SWITCH ASSEMBLY
(a) Disconnect the connector.
|
Remove in this Direction
|
(b) Remove the level warning switch assembly as shown in the illustration.
|