| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AYIV |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: WIPER / WASHER: WIPER SWITCH: REMOVAL; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] | ||
REMOVAL
PROCEDURE
1. CHANGE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column)
Click here
![2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column): REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE LOWER STEERING COLUMN COVER
NOTICE:
Removing the lower steering column cover in the incorrect order will cause the parts to break.
(a) for Manual Tilt and Manual Telescopic Steering Column:
(1) Release the tilt and telescopic lever and fully extend and lower the steering column assembly.
(2) Lock the tilt and telescopic lever.
|
(b) Turn the steering wheel assembly to the left and remove the screw. |
|
|
(c) Turn the steering wheel assembly to the right and remove the screw. |
|
|
(d) Remove the screw. |
|
(e) Push the lower steering column cover and disengage the 2 claws as shown in the illustration.
|
Push |
|
(f) Disengage the 2 claws to remove the lower steering column cover. |
|
3. REMOVE UPPER STEERING COLUMN COVER
(a) Disengage the claw to separate the upper steering column cover as shown in the illustration.
|
Remove in this Direction |
|
(b) Disengage the 2 claws and 4 clips to remove the upper steering column cover. |
|
4. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.
|
*a |
Protective Tape |
|
|
Remove in this Direction |
NOTICE:
If the claw is pulled with excessive force, it may break.
|
|