LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): B2414; Steering Position Sensor; 2019 - 2022 MY Avalon [04/2018 - ]

Last Modified: 08-21-2023	6.11:8.1.0	Doc ID: RM100000001AYAY
Model Year Start: 2019	Model: Avalon	Prod Date Range: [04/2018 - ]
Title: LIGHTING (EXT): LIGHTING SYSTEM (for Gasoline Model with Cornering Light): B2414; Steering Position Sensor; 2019 - 2022 MY Avalon [04/2018 - ]

DTC

B2414

Steering Position Sensor

DESCRIPTION

The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	DTC Output from
B2414	Steering Position Sensor	Detection condition: The engine switch is on (IG). Malfunction status: Sensor malfunction signals are continuously received from the steering sensor Malfunction duration: 10 seconds or more	Electronically controlled brake system	HL AutoLeveling

WIRING DIAGRAM

PROCEDURE

1.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(e) Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs

NEXT

2.	CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Wait 10 seconds or more.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(f) Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes

OK:

DTC B2414 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM