| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AY9G |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - 08/2019] |
| Title: HEATING / AIR CONDITIONING: RELAY: ON-VEHICLE INSPECTION; 2019 MY Avalon Avalon HV [04/2018 - 08/2019] | ||
ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT MG CLT RELAY (for 2GR-FKS)
|
*a |
MG CLT Relay |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Battery voltage applied between terminal 1 and 2 |
Below 1 Ω |
|
3 - 5 |
Battery voltage not applied between terminal 1 and 2 |
10 kΩ or higher |
If the result is not as specified, replace the MG CLT relay.
2. INSPECT PTC HEATER RELAY (for A25A-FXS)
|
*a |
PTC Heater Relay |
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
|
Tester Connection |
Condition |
Specified Condition |
|---|---|---|
|
3 - 5 |
Auxiliary battery voltage applied between terminal 1 and 2 |
Below 1 Ω |
|
3 - 5 |
Auxiliary battery voltage not applied between terminal 1 and 2 |
10 kΩ or higher |
- If the result is not as specified, replace the PTC heater relay.
|
|