Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001AY11
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 - 08/2020]
Title: INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: REMOVAL; 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]

REMOVAL

PROCEDURE

1. REMOVE CONSOLE BOX POCKET

(a) Remove the console box pocket.

2. REMOVE CONSOLE BOX CARPET

(a) Remove the console box carpet.

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH

(a) Disengage the 9 clips as shown in the illustration to remove the lower instrument panel finish panel LH.

Remove in this Direction

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH

(a) Disengage the 8 clips as shown in the illustration to remove the lower instrument panel finish panel RH.

Remove in this Direction

5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH

(a) Disengage the 6 clips as shown in the illustration.

Remove in this Direction

(b) Disconnect the 4 connectors.

(c) Disengage the 2 clamps to remove the front console upper panel garnish.

6. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY

(a) Disengage the 12 clips as shown in the illustration to remove the console box pocket sub-assembly.

Remove in this Direction (1)

Remove in this Direction (2)

7. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

(a) Remove the 4 screws.

(b) Disengage the 2 clips and 2 guides as shown in the illustration to remove the center instrument cluster finish panel sub-assembly.

Remove in this Direction

8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

for Gasoline Model: Click here 2019 - 2022 MY Avalon [04/2018 -        ]; UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL+

for HV Model: Click here 2019 - 2022 MY Avalon HV [04/2018 -        ]; P710 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER KNOB: REMOVAL+

9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY

(a) Disengage the 7 clips as shown in the illustration.

Remove in this Direction

(b) Disconnect the 2 connectors to remove the rear upper console panel sub-assembly.

10. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

(a) Disengage the 2 claws, clip and guide as shown in the illustration to remove the instrument panel finish panel end LH.

Place Hand Here

Remove in this Direction

11. REMOVE CONSOLE BOX BEZEL

(a) Disengage the 6 clips as shown in the illustration.

Remove in this Direction

(b) Disconnect the connector to remove the console box bezel.

12. REMOVE UPPER FRONT CONSOLE PANEL SUB-ASSEMBLY

(a) Disengage the 4 clips as shown in the illustration.

Remove in this Direction

(b) Disconnect the connector and disengage the clamp to remove the upper front console panel sub-assembly.

13. REMOVE CONSOLE ASSEMBLY

(a) Disconnect the 2 connectors.

(b) Remove the 4 bolts and 2 screws.

(c) Disengage the 2 clips as shown in the illustration to remove the console assembly.

Remove in this Direction