DESCRIPTIONThe main body ECU (multiplex network body ECU) detects the condition of the mood switch on the roof console box sub-assembly using this circuit. WIRING DIAGRAMCAUTION / NOTICE / HINTNOTICE: Before replacing the main body ECU (multiplex network body ECU), refer to Registration. PROCEDURE
(a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Data List. (e) Read the Data List according to the display on the Techstream. Body Electrical > Main Body > Data List
Body Electrical > Main Body > Data List
OK: Normal conditions listed above are displayed.
(a) Remove the mood switch (roof console box sub-assembly). (b) Inspect the mood switch (roof console box sub-assembly).
(a) Disconnect the G33 main body ECU (multiplex network body ECU) connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|