| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AWYN |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 -                    
                                       ] |  
                        | Title: DOOR LOCK: REAR DOOR LOCK: INSPECTION; 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ] |  INSPECTIONPROCEDURE1. INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY LH 
                     
                        
                           | (a) Check the operation of the door lock motor. (1) Apply auxiliary battery voltage and check the operation of the door lock motor. OK:  
                                 
                                 
                                 
                                    
                                       | Auxiliary Battery Connection | Result |  
                                       | Auxiliary battery positive (+) → Terminal 4 Auxiliary battery negative (-) → Terminal 1 | Locks |  
                                       | Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 4 | Unlocks |  If the result is not as specified, replace the rear door lock with motor assembly LH. | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Unlock |  
                                                | *b | Lock |  
                                                | *c | Component without harness connected (Rear Door Lock with Motor Assembly LH) |  |  |  (b) Check the operation of the unlock detection switch. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:  
                     
                        
                        
                        
                     
                     
                        
                           | Tester Connection | Condition | Specified Condition |  
                           | 6 - 9 | Locked | 10 kΩ or higher |  
                           | 6 - 9 | Unlocked | Below 1 Ω |  If the result is not as specified, replace the rear door lock with motor assembly LH. 2. INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY RH 
                     
                        
                           | (a) Check the operation of the door lock motor. (1) Apply auxiliary battery voltage and check the operation of the door lock motor. OK:  
                                 
                                 
                                 
                                    
                                       | Auxiliary Battery Connection | Result |  
                                       | Auxiliary battery positive (+) → Terminal 4 Auxiliary battery negative (-) → Terminal 1 | Locks |  
                                       | Auxiliary battery positive (+) → Terminal 1 Auxiliary battery negative (-) → Terminal 4 | Unlocks |  If the result is not as specified, replace the rear door lock with motor assembly RH. | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Unlock |  
                                                | *b | Lock |  
                                                | *c | Component without harness connected (Rear Door Lock with Motor Assembly RH) |  |  |  (b) Check the operation of the unlock detection switch. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:  
                     
                        
                        
                        
                     
                     
                        
                           | Tester Connection | Condition | Specified Condition |  
                           | 6 - 9 | Locked | 10 kΩ or higher |  
                           | 6 - 9 | Unlocked | Below 1 Ω |  If the result is not as specified, replace the rear door lock with motor assembly RH. |