| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AWII |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - 08/2021] |  
                        | Title: PARKING BRAKE: ELECTRIC PARKING BRAKE SYSTEM (for HV Model): C1245; Deceleration Sensor; 2019 - 2021 MY Avalon HV [04/2018 - 08/2021] |  
                     
                        
                           | DTC | C1245 | Deceleration Sensor |  DESCRIPTIONThe parking brake ECU (brake actuator assembly) receives vehicle tilt angle information from the deceleration sensor (airbag ECU assembly) via CAN communication. 
                     
                        
                        
                        
                        
                        
                        
                     
                     
                        
                           | DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |  
                           | C1245 | Deceleration Sensor | One of following conditions is met: 
                                 
                                    
An error signal is sent from deceleration sensor (airbag ECU assembly) for approximately 0.3 seconds.
While the deceleration sensor (airbag ECU assembly) signal is judged to be stuck, starting off and stopping of vehicle occurs 16 times.
Comparison error between deceleration sensor (airbag ECU assembly) 1 and deceleration sensor (airbag ECU assembly) 2 output values occurs for 60 seconds or more.
 | Deceleration sensor (Airbag ECU assembly) | DTC stored | An electric parking brake system malfunction is displayed on the multi-information display. |  DTC Detection Conditions
                     
                        
                        
                        
                        
                        
                     
                     
                        
                           |  | Vehicle Condition |  
                           | Pattern 1 | Pattern 2 | Pattern 3 |  
                           | Diagnosis Condition | Power switch on (IG) | ○ | ○ | ○ |  
                           | Malfunction Status | An error signal is sent from the deceleration sensor (airbag ECU assembly) | ○ | - | - |  
                           | While the deceleration sensor (airbag ECU assembly) signal is judged to be stuck, starting off and stopping the vehicle occurs 16 times | - | ○ | - |  
                           | Comparison error between deceleration sensor (airbag ECU assembly) 1 and deceleration sensor (airbag ECU assembly) 2 output values occurs | - | - | ○ |  
                           | Detection Time | Approximately 0.3 seconds | - | 60 seconds or more |  
                           | Number of Trips | 1 trip | 1 trip | 1 trip |  HINT: DTC will be output when conditions for either of the patterns in the table above are met. CAUTION / NOTICE / HINTNOTICE: When replacing the deceleration sensor (airbag ECU assembly), perform initialization and calibration of the linear solenoid valve. Click here
                        
                           
                              ![2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model): INITIALIZATION](/t3Portal/stylegraphics/info.gif)  PROCEDURE
                     
                        
                           | 1.  | CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM) |  (a) Check for DTCs. Chassis > ABS/VSC/TRAC > Trouble Codes
                     
                        
                           | Result | Proceed to |  
                           | DTC is not output | A |  
                           | DTC is output | B |  
                     
                        | 
                              
                                 | A |  
                                 |   |  |  
                     
                        
                           | 2.  | CHECK DTC (ELECTRIC PARKING BRAKE SYSTEM) |  (a) Clear the DTCs. Chassis > Electric Parking Brake > Clear DTCs(b) Turn the power switch off. (c) Check for DTCs. Chassis > Electric Parking Brake > Trouble Codes
                     
                        
                           | Result | Proceed to |  
                           | DTCs are output | A |  
                           | DTCs are not output | B |  |