Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AUAK |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: ON-VEHICLE INSPECTION; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] |
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the rear seat 3 point type belt assembly.
PROCEDURE
1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
for HV Model:
Click here
for Gasoline Model:
Click here
(b) Visually check for defects with the rear seat 3 point type belt assembly installed to the vehicle.
(1) The defects to be checked are as follows:
-
Cuts on the rear seat 3 point type belt assembly
-
Small cracks on the rear seat 3 point type belt assembly
-
Significant discoloration on the rear seat 3 point type belt assembly
OK:
No defects are found.
HINT:
If any defects are found, replace the rear seat 3 point type belt assembly with a new one.
2. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY (for Vehicle Involved in Collision)
(a) Perform a diagnostic system check.
for HV Model:
Click here
for Gasoline Model:
Click here
(b) Visually check for defects with the rear seat 3 point type belt assembly removed from the vehicle.
(1) The defects to be checked are as follows:
-
Cuts on the rear seat 3 point type belt assembly
-
Small cracks on the rear seat 3 point type belt assembly
-
Significant discoloration on the rear seat 3 point type belt assembly
-
Cracks or other damage on the connector
OK:
No defects are found.
HINT:
If any defects are found, replace the rear seat 3 point type belt assembly with a new one.
|