Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AU7F |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: SUSPENSION CONTROL: ADAPTIVE VARIABLE SUSPENSION SYSTEM: U0100-U0122,U0124,U0126; Lost Communication With ECM/PCM "A"; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] |
DTC
|
U0100
|
Lost Communication With ECM/PCM "A"
|
DTC
|
U0101
|
Lost Communication with TCM
|
DTC
|
U0122
|
Lost Communication With Vehicle Dynamics Control Module
|
DTC
|
U0124
|
Lost Communication with Lateral Acceleration Sensor Module
|
DTC
|
U0126
|
Lost Communication with Steering Angle Sensor Module
|
DESCRIPTION
The absorber control ECU receives signals from the ECM, skid control ECU (brake actuator assembly), airbag ECU assembly and steering sensor via CAN communication.
When DTCs indicating a CAN communication system malfunction are output, repair the CAN communication system first.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Warning Indicate
|
Memory
|
U0100
|
Lost Communication With ECM/PCM "A"
|
While driving at 30 km/h (19 mph) or more, data is not received via CAN communication for 3 seconds or more.
|
-
ECM
-
CAN communication system
-
Absorber control ECU
|
Does not come on
|
Yes
|
U0101
|
Lost Communication with TCM
|
While driving at 30 km/h (19 mph) or more, data is not received via CAN communication for 6 seconds or more.
|
-
ECM
-
CAN communication system
-
Absorber control ECU
|
Does not come on
|
Yes
|
U0122
|
Lost Communication With Vehicle Dynamics Control Module
|
Data is not received from the skid control ECU (brake actuator assembly) via CAN communication for 3 seconds or more.
|
-
Skid control ECU (brake actuator assembly)
-
CAN communication system
-
Absorber control ECU
|
Does not come on
|
Yes
|
U0124
|
Lost Communication with Lateral Acceleration Sensor Module
|
Data is not received from the airbag ECU assembly via CAN communication for 3 seconds or more.
|
-
Airbag ECU assembly
-
CAN communication system
-
Absorber control ECU
|
Does not come on
|
Yes
|
U0126
|
Lost Communication with Steering Angle Sensor Module
|
Data is not received from the steering sensor via CAN communication for 3 seconds or more.
|
-
Steering sensor
-
CAN communication system
-
Absorber control ECU
|
Does not come on
|
Yes
|
CAUTION / NOTICE / HINT
NOTICE:
-
Before performing troubleshooting, inspect the connectors of related circuits.
-
If DTC C1782 (Power Source Voltage Malfunction) is output at the same time, perform troubleshooting for C1782 first.
Click here
-
Before replacing the absorber control ECU, perform all of the following:
-
Symptom simulation.
Click here
-
DTC inspection.
Click here
-
Techstream inspection.
Click here
-
If no malfunctions are found in other areas, replace the absorber control ECU.
-
After replacing the absorber control ECU with a new one, perform registration of vehicle identification information.
Click here
PROCEDURE
(a) Clear the DTCs.
Click here
Chassis > Air suspension > Clear DTCs
(b) Turn the engine switch off.
(c) Drive the vehicle at a speed of 30 km/h (19 mph) or more for 10 seconds or more.
(d) Check for DTCs.
Click here
Chassis > Air suspension > Trouble Codes
Result
|
Proceed to
|
CAN DTCs are not output
|
A
|
CAN DTCs are output
|
B
|
HINT:
If a CAN communication malfunction DTC and a related sensor malfunction DTC are output at the same time, the CAN communication malfunction must be repaired before troubleshooting the sensor.
|