| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001ATXC |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: SUSPENSION CONTROL: FRONT ACCELERATION SENSOR: REMOVAL; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] | ||
REMOVAL
PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH (for LH Side)
Click here
![2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; INTERIOR PANELS / TRIM: ROOF HEADLINING: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (for LH Side)
Click here
3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LH Side)
Click here
4. REMOVE FRONT DOOR SCUFF PLATE RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
Click here
5. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH (for RH Side)
HINT:
Use the same procedure as for the LH side.
Click here
6. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RH Side)
HINT:
Disconnect the front door opening trim weatherstrip RH to the extent that allows the removal of the instrument side panel RH.
7. REMOVE GLOVE COMPARTMENT PLATE (for RH Side)
Click here
8. REMOVE INSTRUMENT SIDE PANEL RH (for RH Side)
Click here
9. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RH Side)
Click here
10. REMOVE ACCELERATION SENSOR ASSEMBLY LH (for LH Side)
|
(a) Disconnect the connector from the acceleration sensor assembly LH. |
|
(b) Disengage the clamp.
(c) Remove the 2 nuts and acceleration sensor assembly LH.
NOTICE:
- Avoid any impact to the acceleration sensor assembly LH.
- Do not drop the acceleration sensor assembly LH. If it is dropped, replace it with a new one.
11. REMOVE ACCELERATION SENSOR ASSEMBLY RH (for RH Side)
|
(a) Disconnect the connector from the acceleration sensor assembly RH. |
|
(b) Remove the bolt and acceleration sensor assembly RH.
NOTICE:
- Avoid any impact to the acceleration sensor assembly RH.
- Do not drop the acceleration sensor assembly RH. If it is dropped, replace it with a new one.
|
|