Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001ATWD
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 -           ]
Title: STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Manual Tilt and Manual Telescopic Steering Column): DISASSEMBLY; 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]

DISASSEMBLY

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the steering lock actuator assembly, refer to Registration.

for Gasoline Model: Click here 2019 - 2020 MY Avalon [04/2018 - 08/2020]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION 2021 - 2022 MY Avalon [08/2020 -        ]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, Gasoline Model): REGISTRATION

for HV Model: Click here 2019 - 2020 MY Avalon HV [04/2018 - 08/2020]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, HV Model): REGISTRATION 2021 - 2022 MY Avalon HV [08/2020 -        ]; THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Start Function, HV Model): REGISTRATION

PROCEDURE

1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY

(a) Secure the steering column assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.

(b) Using SST, strike a punch mark for drilling in the center of the steering lock set bolt.

SST: 09622-00010

NOTICE:

When striking the punch mark, in order to prevent impact force from being applied to the steering lock actuator assembly, do not use a normal center punch.

(c) Using a drill, drill a hole in the 2 steering lock set bolts and insert a screw extractor.

(d) Using the screw extractor, remove the 2 steering lock set bolts, upper steering column clamp and steering lock actuator assembly.