AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION; 2019 - 2022 MY Avalon Avalon HV [04/2018

Last Modified: 08-21-2023	6.11:8.1.0	Doc ID: RM100000001ATSF
Model Year Start: 2019	Model: Avalon HV	Prod Date Range: [04/2018 - ]
Title: AUDIO / VIDEO: RADIO RECEIVER: INSTALLATION; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ]

INSTALLATION

1. PRECAUTION

(a) w/o Navigation System:

NOTICE:

When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.

NOTICE:

for Gasoline Model: Click here

for HV Model: Click here

(b) w/ Navigation System:

NOTICE:

When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly or navigation ECU may not operate normally.
After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.

NOTICE:

for Gasoline Model: Click here

for HV Model: Click here

2. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY

3. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

(a) Engage the 8 claws to install the No. 2 instrument panel register assembly as shown in the illustration.

Install in this Direction

4. INSTALL NO. 2 RADIO RECEIVER BRACKET

(a) Install the No. 2 radio receiver bracket with the 4 screws.

5. INSTALL NO. 1 RADIO RECEIVER BRACKET

(a) Install the No. 1 radio receiver bracket with the 4 screws.

6. INSTALL INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY

Click here

7. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET

(a) Connect each connector.

(b) Engage the 5 clips to temporarily install the radio and display receiver assembly with bracket as shown in the illustration.

Install in this Direction

8. INSTALL CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL

Click here

9. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

Click here

10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

Click here

11. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY

Click here

12. INSTALL FRONT CONSOLE UPPER PANEL GARNISH

Click here

13. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH

Click here

14. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH

Click here