Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001ATSE |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: AUDIO / VIDEO: RADIO RECEIVER: REMOVAL; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] |
REMOVAL
PROCEDURE
1. PRECAUTION
(a) w/o Navigation System:
NOTICE:
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
-
A communication malfunction DTC may be stored.
-
The radio and display receiver assembly may not operate normally.
NOTICE:
for Gasoline Model: Click here
for HV Model: Click here
(b) w/ Navigation System:
NOTICE:
-
When replacing the radio and display receiver assembly or navigation ECU, always replace it with a new one. If a radio and display receiver assembly or navigation ECU which was installed to another vehicle is used, the following may occur:
-
A communication malfunction DTC may be stored.
-
The radio and display receiver assembly or navigation ECU may not operate normally.
-
After replacing the radio and display receiver assembly, if "New software is not compatible with the system. Contact your dealer." is displayed on the multi-display, update the software of the navigation ECU.
NOTICE:
for Gasoline Model: Click here
for HV Model: Click here
2. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
Click here
3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
Click here
4. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
Click here
5. REMOVE CONSOLE BOX POCKET SUB-ASSEMBLY
Click here
6. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
7. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL
Click here
8. REMOVE CENTER NO. 2 INSTRUMENT CLUSTER FINISH PANEL
Click here
9. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
(b) Pull the radio and display receiver assembly with bracket toward the rear of the vehicle to disengage the 5 clips.
|
Remove in this Direction
|
(c) Disconnect each connector and remove the radio and display receiver assembly with bracket.
10. REMOVE INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY
Click here
11. REMOVE NO. 1 RADIO RECEIVER BRACKET
(a) Remove the 4 screws and No. 1 radio receiver bracket.
|
|
12. REMOVE NO. 2 RADIO RECEIVER BRACKET
(a) Remove the 4 screws and No. 2 radio receiver bracket.
|
|
13. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
(a) Disengage the 8 claws and remove the No. 2 instrument panel register assembly as shown in the illustration.
|
Remove in this Direction
|
14. REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY
|