Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001ATRI |
Model Year Start: 2019 |
Model: Avalon |
Prod Date Range: [04/2018 -
] |
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Gasoline Model): B15FE,B15FF; XM Tuner Antenna Disconnected; 2019 - 2022 MY Avalon [04/2018 - ] |
DTC
|
B15FE
|
XM Tuner Antenna Disconnected
|
DTC
|
B15FF
|
XM Tuner Antenna Short
|
DESCRIPTION
These DTCs are stored when a malfunction occurs in the telephone antenna assembly which is connected to the radio and display receiver assembly.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
B15FE
|
XM Tuner Antenna Disconnected
|
The telephone antenna assembly is not connected
|
-
No. 4 antenna cord sub-assembly
-
No. 3 antenna cord sub-assembly
-
No. 2 antenna cord sub-assembly
-
Telephone antenna assembly
-
Radio and display receiver assembly
|
B15FF
|
XM Tuner Antenna Short
|
A short occurs in the telephone antenna assembly
|
-
No. 4 antenna cord sub-assembly
-
No. 3 antenna cord sub-assembly
-
No. 2 antenna cord sub-assembly
-
Telephone antenna assembly
-
Radio and display receiver assembly
|
CAUTION / NOTICE / HINT
NOTICE:
-
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System.
Click here
-
When replacing the radio and display receiver assembly, always replace it with a new one. If a radio and display receiver assembly which was installed to another vehicle is used, the following may occur:
-
A communication malfunction DTC may be stored.
-
The radio and display receiver assembly may not operate normally.
PROCEDURE
1.
|
REPLACE NO. 4 ANTENNA CORD SUB-ASSEMBLY
|
(a) Replace the No. 4 antenna cord sub-assembly with a new or known good one.
Click here
(b) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
(c) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK |
|
END
|
NG
|
|
|
2.
|
REPLACE NO. 3 ANTENNA CORD SUB-ASSEMBLY
|
(a) Replace the No. 3 antenna cord sub-assembly with a new or known good one.
Click here
(b) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
(c) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK |
|
END
|
NG
|
|
|
3.
|
REPLACE NO. 2 ANTENNA CORD SUB-ASSEMBLY
|
(a) Replace the No. 2 antenna cord sub-assembly with a new or known good one.
Click here
(b) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
(c) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK |
|
END
|
NG
|
|
|
4.
|
REPLACE TELEPHONE ANTENNA ASSEMBLY
|
(a) Replace the telephone antenna assembly with a new or known good one.
Click here
(b) Clear the DTCs.
Body Electrical > Navigation System > Clear DTCs
(c) Recheck for DTCs and check that no DTCs are output.
Body Electrical > Navigation System > Trouble Codes
OK:
No DTCs are output.
OK |
|
END
|
|