| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001ATRB |  
                        | Model Year Start: 2019 | Model: Avalon | Prod Date Range: [04/2018 -                    
                                       ] |  
                        | Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM (for Gasoline Model): Reverse Signal Circuit; 2019 - 2022 MY Avalon [04/2018 -        ] |  DESCRIPTIONThe radio and display receiver assembly receives a reverse signal from the BKUP LP relay. WIRING DIAGRAM  PROCEDURE(a) Move the shift lever to R and check if the back-up lights come on. OK:  The back-up lights come on. 
                     
                        | 
                              
                                 | OK |  
                                 |   |  |  
                     
                        
                           | 2.  | CHECK HARNESS AND CONNECTOR (REVERSE SIGNAL) |  (a) Disconnect the G3 radio and display receiver assembly connector. (b) Measure the voltage according to the value(s) in the table below. Standard Voltage:  
                     
                        
                        
                        
                     
                     
                        
                           | Tester Connection | Condition | Specified Condition |  
                           | G3-28 (REV) - Body ground | Engine switch on (IG) Shift lever in R | 11 to 14 V |  
                           | G3-28 (REV) - Body ground | Engine switch on (IG) Shift lever not in R | Below 1 V |  
                     
                        
                           | NG |   | REPAIR OR REPLACE HARNESS OR CONNECTOR |  |