Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001ASWC
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 - 08/2020]
Title: INTERIOR PANELS / TRIM: ROOF HEADLINING: INSTALLATION; 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]

INSTALLATION

PROCEDURE

1. INSTALL ROOF HEADLINING ASSEMBLY

(a) Install the 4 clips to the roof headlining assembly.

*a

Clip (Black)

*b

Clip (White)

(b) Put the roof headlining assembly into the vehicle through the front door RH as shown in the illustration.

Install in this Direction

-

-

NOTICE:

Do not damage the roof headlining assembly or vehicle interior.

(c) for Roof Side (for Normal Roof):

(1) Engage the 2 claws to install the base of each visor holder.

*a

Base of Visor Holder

-

-

(2) Engage the 4 clips and install the roof headlining assembly.

(d) for Roof Side (for Moon Roof):

(1) Engage the 2 claws to install the base of each visor holder.

*a

Base of Visor Holder

-

-

(2) Engage the 4 clips and install the roof headlining assembly.

(3) Connect the connector.

(e) for Rear Pillar LH Side:

(1) Engage the guide.

(2) Connect the connector.

(f) for Rear Pillar RH Side:

(1) Engage the guide.

(2) Connect each connector.

(g) for Front Pillar LH Side:

(1) Remove the protective cover.

(2) Engage the 4 clamps.

(3) Connect the 2 connectors.

(4) Install the protective cover.

(h) for Front Pillar RH Side:

(1) Remove the protective cover.

(2) Engage the 2 clamps.

(3) Engage the guide.

(4) Connect the connector bracket with the bolt.

(5) Install the protective cover.

(i) for Windshield Glass Side:

(1) Connect each connector.

2. INSTALL SUN ROOF OPENING TRIM MOULDING (for Moon Roof)

(a) Align the alignment tape on the sun roof opening trim moulding with the notch of the roof headlining assembly and install the sun roof opening trim moulding.

NOTICE:

After installation, check that the corners fit correctly.

*a

Alignment Tape

*b

Notch

3. INSTALL VISOR HOLDER LH

(a) Install the visor holder LH as shown in the illustration.

Install in this Direction

4. INSTALL VISOR ASSEMBLY LH

NOTICE:

Make sure to install the visor assembly LH with its arrow facing the front of the vehicle.

(a) Connect the connector.

(b) Connect the visor assembly LH to the visor holder LH.

*1

Visor Holder LH

(c) for "TORX" Screw:

(1) Using a T25 "TORX" socket wrench, install the visor assembly LH with the 2 screws.

(d) except "TORX" Screw:

(1) Install the visor assembly LH with the 2 screws.

5. INSTALL VISOR BRACKET COVER LH

(a) Engage the 4 claws to install the visor bracket cover LH.

6. INSTALL VISOR HOLDER RH

HINT:

Use the same procedure as for the LH side.

7. INSTALL VISOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

8. INSTALL VISOR BRACKET COVER RH

HINT:

Use the same procedure as for the LH side.

9. INSTALL ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for all assist grip sub-assemblies.

(a) Install the 2 clips to the assist grip.

(b) Temporarily install the 2 assist grip covers to the assist grip as shown in the illustration.

(c) Engage the 2 clips to install the assist grip sub-assembly as shown in the illustration.

Install in this Direction

(d) Engage the 4 claws to install the assist grip cover LH and assist grip cover RH.

NOTICE:

Make sure that the clip is engaged securely.

*1

Assist Grip Cover LH

*2

Assist Grip Cover RH

10. INSTALL REAR ASSIST GRIP ASSEMBLY LH

HINT:

Use the same procedure as for the assist grip sub-assembly.

11. INSTALL REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure as for the assist grip sub-assembly.

12. INSTALL NO. 1 FORWARD RECOGNITION COVER

Click here 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; CRUISE CONTROL: FRONT CAMERA: INSTALLATION+

13. INSTALL NO. 2 FORWARD RECOGNITION COVER

Click here 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; CRUISE CONTROL: FRONT CAMERA: INSTALLATION+

14. INSTALL AIR CONDITIONING THERMISTOR ASSEMBLY (w/ Humidity Sensor)

Click here 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; HEATING / AIR CONDITIONING: HUMIDITY SENSOR: INSTALLATION+

15. INSTALL SENSOR COVER (w/ Humidity Sensor)

Click here 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; HEATING / AIR CONDITIONING: HUMIDITY SENSOR: INSTALLATION+

16. INSTALL SPOT LIGHT ASSEMBLY

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; LIGHTING (INT): ROOM LIGHT: INSTALLATION+

17. INSTALL ROOF CONSOLE BOX ASSEMBLY

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; LIGHTING (INT): PERSONAL LIGHT: INSTALLATION+

18. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

for UA80E: Click here 2019 - 2022 MY Avalon [04/2018 -        ]; UA80E (AUTOMATIC TRANSMISSION / TRANSAXLE): SHIFT LEVER: INSTALLATION

for P710: Click here 2019 - 2022 MY Avalon HV [04/2018 -        ]; P710 (HYBRID TRANSMISSION / TRANSAXLE): SHIFT LEVER: INSTALLATION

19. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: INSTALLATION

20. INSTALL ROOF SIDE INNER GARNISH LH

(a) Install 3 new clips to the roof side inner garnish LH.

(b) Engage the guide as shown in the illustration.

Install in this Direction

(c) Engage the 3 clips to install the roof side inner garnish LH as shown in the illustration.

Install in this Direction

21. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY LH

(a) Engage the 3 guides and 3 claws as indicated by the arrows, in the order shown in the illustration to install the roof side rail garnish assembly LH.

Install in this Direction (1)

Install in this Direction (2)

22. INSTALL CENTER PILLAR UPPER GARNISH LH

(a) Install a new clip to the center pillar upper garnish LH.

(b) Engage the 3 guides and clip as shown in the illustration.

Install in this Direction

(c) Install the center pillar upper garnish LH with the 2 clips.

23. INSTALL CENTER PILLAR LOWER GARNISH LH

(a) Engage the 2 claws and 3 clips to install the center pillar lower garnish LH as shown in the illustration.

Install in this Direction

24. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

Click here 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION+

25. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side)

Click here 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: INSTALLATION+

26. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; DOOR / HATCH: REAR DOOR OPENING TRIM WEATHERSTRIP: INSTALLATION+

27. INSTALL REAR DOOR SCUFF PLATE LH (for Gasoline Model)

(a) Engage the guide and 6 claws to install the rear door scuff plate LH as shown in the illustration.

Install in this Direction

28. INSTALL REAR DOOR SCUFF PLATE LH (for HV Model)

(a) Engage the guide, 6 claws and clip to install the rear door scuff plate LH as shown in the illustration.

Install in this Direction

29. INSTALL FRONT PILLAR GARNISH LH

(a) Remove the protective cover.

(b) Install 2 new front pillar garnish clips to the front pillar garnish LH.

HINT:

Make sure that the front pillar garnish clip is engaged correctly.

*1

Front Pillar Garnish Clip

*2

Front Pillar Garnish LH

(c) w/o Front No. 3 Speaker:

(1) Push the front pillar garnish LH as shown in the illustration to engage the 2 guides.

Install in this Direction

(d) w/ Front No. 3 Speaker:

(1) Connect the connector.

(2) Push the front pillar garnish LH as shown in the illustration to engage the 2 guides.

(e) Engage the 2 front pillar garnish clips to install the front pillar garnish LH as shown in the illustration.

HINT:

Make sure that the curtain shield airbag assembly LH is not pinched.

*1

Front Pillar Garnish Clip

Install in this Direction

30. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; DOOR / HATCH: FRONT DOOR OPENING TRIM WEATHERSTRIP: INSTALLATION+

31. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

(a) Engage the claw and clip as shown in the illustration.

Install in this Direction

(b) Install the cowl side trim sub-assembly LH with the clip.

32. INSTALL FRONT DOOR SCUFF PLATE LH

(a) Engage the guide and 10 claws to install the front door scuff plate LH as shown in the illustration.

Install in this Direction

33. INSTALL ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.

34. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

35. INSTALL CENTER PILLAR UPPER GARNISH RH

HINT:

Use the same procedure as for the LH side.

36. INSTALL CENTER PILLAR LOWER GARNISH RH

HINT:

Use the same procedure as for the LH side.

37. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

38. INSTALL LAP BELT OUTER ANCHOR COVER (for RH Side)

HINT:

Use the same procedure as for the LH side.

39. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.

40. INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

41. INSTALL FRONT PILLAR GARNISH RH

HINT:

Use the same procedure as for the LH side.

42. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.

43. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

44. INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side.

45. INSTALL REAR SEAT ASSEMBLY

Click here 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; SEAT: REAR SEAT ASSEMBLY: INSTALLATION

46. INSTALL FRONT SEAT ASSEMBLY

Click here 2019 - 2020 MY Avalon Avalon HV [04/2018 - 08/2020]; SEAT: FRONT SEAT ASSEMBLY: INSTALLATION