| (a) Measure the resistance according to the value(s) in the table below. Standard Resistance:  
                                 
                                 
                                 
                                 
                                    
                                       | Tester Connection | Condition | Specified Condition |  
                                       | 1 - 2 | Open | 10 kΩ or higher |  
                                       | Locked | Below 1 Ω |  If the result is not as specified, replace the engine hood courtesy switch (hood lock assembly). | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Open |  
                                                | *b | Lock |  
                                                | *c | Component without harness connected (Engine Hood Courtesy Switch (Hood Lock Assembly)) |  |  |