Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AREJ |
Model Year Start: 2019 |
Model: Avalon |
Prod Date Range: [04/2018 -
] |
Title: THEFT DETERRENT / KEYLESS ENTRY: SMART KEY SYSTEM (for Entry Function, Gasoline Model): Entry Interior Alarm does not Sound; 2019 - 2022 MY Avalon [04/2018 - ] |
Entry Interior Alarm does not Sound
|
DESCRIPTION
The smart key system (for Entry Function) uses the buzzer in the combination meter assembly (meter ECU) to perform various vehicle interior warnings. When the conditions of each warning are met, the certification ECU (smart key ECU assembly) sends a buzzer activation request signal to the combination meter assembly via CAN communication and the buzzer sounds.
CAUTION / NOTICE / HINT
NOTICE:
-
The smart key system (for Entry Function, Gasoline Model) uses the CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the smart key system (for Entry Function, Gasoline Model) after confirming that the communication systems are functioning properly.
Click here
-
When using the Techstream with the engine switch off, connect the Techstream to the DLC3 and turn a courtesy light switch on and off at intervals of 1.5 seconds or less until communication between the Techstream and the vehicle begins. Then select the vehicle type under manual mode and enter the following menus: Body Electrical / Smart Key. While using the Techstream, periodically turn a courtesy light switch on and off at intervals of 1.5 seconds or less to maintain communication between the Techstream and the vehicle.
Click here
-
After repair, confirm that no DTCs are output.
PROCEDURE
1.
|
CHECK ENTRY LOCK OPERATION
|
(a) Check that the function operates normally.
Click here
Result
|
Proceed to
|
Entry function operates normally
|
A
|
Entry function does not operate normally
|
B
|
|