Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001ARAS |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: ON-VEHICLE INSPECTION; 2019 - 2022 MY Avalon Avalon HV [04/2018 - ] |
ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the airbag ECU assembly.
PROCEDURE
1. INSPECT AIRBAG ECU ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
for Gasoline Model: Click here
for HV Model: Click here
2. INSPECT AIRBAG ECU ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
for Gasoline Model: Click here
for HV Model: Click here
(b) Visually check for defects with the airbag ECU assembly installed to the vehicle.
HINT:
The defects are as follows:
-
Cracks in the ECU housing
-
Dents in the ECU housing
-
Chips in the ECU housing
-
Cracks or other damage to the connectors
-
Peeling of the label
OK:
No defects are found.
If any defects are found, replace the airbag ECU assembly with a new one.
3. INSPECT AIRBAG ECU ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)
(a) Replace the airbag ECU assembly.
HINT:
The airbag ECU assembly should be replaced after any of the SRS parts has deployed, as it has been subjected to an impact.
|