| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AR7W |
| Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 - ] |
| Title: SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): B166B,B166C,B166F; Front Door Pressure Sensor RH Circuit Range/Performance; 2019 - 2022 MY Avalon HV [04/2018 - ] | ||
|
DTC |
B166B |
Front Door Pressure Sensor RH Circuit Range/Performance |
|
DTC |
B166C |
Front Door Pressure Sensor RH |
|
DTC |
B166F |
Front Door Pressure Sensor Threshold Malfunction (RH) |
DESCRIPTION
The side collision sensor RH circuit (bus 1) consists of the airbag ECU assembly, side airbag pressure sensor RH and side No. 2 airbag sensor RH.
The side airbag pressure sensor RH and side No. 2 airbag sensor RH detect impacts to the vehicle and send signals to the airbag ECU assembly to determine if the airbags and pretensioners should be deployed.
These DTCs are stored when a malfunction is detected in the side airbag pressure sensor RH.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Warning Indicate |
Test Mode / Check Mode |
|---|---|---|---|---|---|
|
B166B |
Front Door Pressure Sensor RH Circuit Range/Performance |
|
|
Comes on |
Does not apply to test/check mode |
|
B166C |
Front Door Pressure Sensor RH |
|
|
Comes on |
Does not apply to test/check mode |
|
B166F |
Front Door Pressure Sensor Threshold Malfunction (RH) |
|
|
Comes on |
Does not apply to test/check mode |
WIRING DIAGRAM
Click here
![2019 - 2022 MY Avalon HV [04/2018 - ]; SUPPLEMENTAL RESTRAINT SYSTEMS: AIRBAG SYSTEM (for HV Model): B166D,B166E; Lost Communication with Front Door Pressure Sensor RH+](/t3Portal/stylegraphics/info.gif)
CAUTION / NOTICE / HINT
NOTICE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
PROCEDURE
|
1. |
CHECK SIDE AIRBAG PRESSURE SENSOR RH |
|
(a) Turn the power switch off. |
|
(b) Disconnect the cable from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminals to disable the SRS system.
(c) Interchange the side airbag pressure sensor RH with LH and connect the connectors.
(d) Connect the cable to the negative (-) auxiliary battery terminal.
(e) Turn the power switch on (IG), and wait for at least 60 seconds.
(f) Clear the DTCs stored in memory.
Body Electrical > SRS Airbag > Clear DTCs
(g) Turn the power switch off.
(h) Turn the power switch on (IG), and wait for at least 60 seconds.
(i) Check for DTCs.
Body Electrical > SRS Airbag > Trouble Codes
HINT:
Codes other than DTCs B166B, B166C, B166F, B167A, B167E and B167F may be output at this time, but they are not related to this check.
|
Result |
Proceed to |
|---|---|
|
DTC B166B, B166C or B166F is output. |
A |
|
DTC B167A, B167E or B167F is output. |
B |
|
DTCs B166B, B166C, B166F, B167A, B167E and B167F are not output. |
C |
(j) Turn the power switch off.
(k) Disconnect the cable from the negative (-) auxiliary battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.
(l) Return the side airbag pressure sensor RH and LH to their original positions and connect the connectors.
| A |
|
REPLACE AIRBAG ECU ASSEMBLY
|
| B |
|
REPLACE SIDE AIRBAG PRESSURE SENSOR RH
|
| C |
|
|
|