| (1) Measure the resistance according to the value(s) in the table below. Standard Resistance:  
                                 
                                 
                                 
                                 
                                    
                                       | Tester Connection | Condition | Specified Condition |  
                                       | 1 - 2 | Pressed (On) | Below 1 Ω |  
                                       | 1 - 2 | Not pressed (Off) | 10 kΩ or higher |  If the result is not as specified, replace the luggage electrical key switch. | 
                                 
                                    |   |  
                                    | 
                                          
                                             
                                             
                                          
                                          
                                             
                                                | *a | Component without harness connected (Luggage Electrical Key Switch) |  |  |