Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001AOUF
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 - 08/2021]
Title: EXTERIOR PANELS / TRIM: GRILLE SHUTTER: REMOVAL; 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during grille shutter removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedure

Effect/Inoperative Function when Necessary Procedure not Performed

Link
*: Only necessary when Television camera assembly has been removed/installed or replaced.

Front television camera assembly, front bumper assembly or radiator grille
  • Television camera view adjustment
  • Television camera assembly optical axis adjustment (Back camera position setting)*

Panoramic View Monitor System

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): INITIALIZATION for Initialization

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM (for HV Model): CALIBRATION for Calibration

Front bumper assembly
  • Measurement of ultrasonic sensor detection angle
  • Ultrasonic sensor detection angle registration
  • Intelligent Clearance Sonar System
  • Intuitive Parking Assist System

2019 - 2022 MY Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: INTELLIGENT CLEARANCE SONAR SYSTEM (for HV Model): CALIBRATION

  • Swing grill actuator assembly
  • Radiator shutter sub-assembly

Change grille shutter control mode and/or perform initialization

Grille Shutter System

2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; EXTERIOR PANELS / TRIM: GRILLE SHUTTER SYSTEM: INITIALIZATION

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL

2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH

(a) Disengage the 2 claws to remove the front radiator side air guide plate LH.

3. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH

(a) Disengage the 2 claws to remove the front radiator side air guide plate RH.

4. REMOVE THERMISTOR ASSEMBLY

Click here 2019 - 2021 MY Avalon HV [04/2018 - 08/2021]; HEATING / AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR (for HV Model): REMOVAL+

5. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY

(a) Disconnect the connector.

(b) Disengage the clamp.

(c) Remove the 3 bolts.

(d) Disengage the 2 guides to remove the radiator shutter sub-assembly as shown in the illustration.

Remove in this Direction