Last Modified: 08-21-2023 6.11:8.1.0 Doc ID: RM100000001AOU3
Model Year Start: 2019 Model: Avalon HV Prod Date Range: [04/2018 - 08/2019]
Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY; 2019 MY Avalon Avalon HV [04/2018 - 08/2019]

DISASSEMBLY

PROCEDURE

1. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: TELEVISION CAMERA (for Front): REMOVAL+

2. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front): REMOVAL+

HINT:

Use the same procedure for the RH side and LH side.

3. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front): REMOVAL+

HINT:

Use the same procedure for the RH side and LH side.

4. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)

(a) Disengage the 11 clamps to remove the No. 4 engine room wire.

5. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Bar Type Radiator Grille)

(a) Remove the 4 screws.

(b) Remove the front license plate bracket sub-assembly as shown in the illustration.

Remove in this Direction

6. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Mesh Type Radiator Grille)

(a) Remove the 4 screws.

(b) Remove the front license plate bracket sub-assembly as shown in the illustration.

Remove in this Direction

7. REMOVE AIR INTAKE DUCT LH

(a) Remove the 2 screws and clip.

Screw

Clip

(b) Disengage the 4 guides to remove the air intake duct LH as shown in the illustration.

Remove in this Direction (1)

Remove in this Direction (2)

8. REMOVE AIR INTAKE DUCT RH

HINT:

Use the same procedure as for the LH side.

9. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY

Click here 2019 - 2021 MY Avalon Avalon HV [04/2018 - 08/2021]; CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR: REMOVAL+

10. REMOVE HOOD TO FRONT END PANEL SEAL

(a) Disengage the 4 clips.

Double-sided Tape

(b) Separate the double-sided tape and remove the hood to front end panel seal.

11. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY

(a) Remove the 2 screws.

(b) Disengage the 2 claws to remove the radiator grille emblem assembly.

12. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

(a) Remove the 3 screws and 2 clips.

Screw

Clip

(b) Remove the 8 screws.

(c) Disengage the 4 claws and guide to remove the radiator grille sub-assembly.

13. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)

(a) Remove the 8 screws.

(b) Disengage the 23 claws and 5 guides to remove the lower radiator grille sub-assembly.

14. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)

(a) Remove the 8 screws.

(b) Disengage the 23 claws and 3 guides to remove the lower radiator grille sub-assembly.

15. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)

(a) Remove the screw.

(b) Disengage the 6 claws and 6 guides to remove the radiator grille.

16. REMOVE FRONT BUMPER MOULDING (for Bar Type Radiator Grille)

(a) Remove the 6 screws.

(b) Disengage the 18 claws and 20 guides to remove the front bumper moulding.

17. REMOVE FRONT BUMPER SIDE RETAINER LH

(a) Remove the bolt (A) and bolt (B).

Bolt (A)

Bolt (B)

(b) Disengage the clip as shown in the illustration.

Remove in this Direction (1)

Remove in this Direction (2)

(c) Disengage the claw to remove the front bumper side retainer LH as shown in the illustration.

18. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.

19. REMOVE NO. 2 FRONT BUMPER ENERGY ABSORBER

(a) Disengage the 4 guides to remove the No. 2 front bumper energy absorber as shown in the illustration.

Remove in this Direction

20. REMOVE FRONT BUMPER ENERGY ABSORBER

(a) Disengage the 2 guides to remove the front bumper energy absorber as shown in the illustration.

Remove in this Direction

21. REMOVE FRONT BUMPER REINFORCEMENT

(a) Remove the headlight assembly LH.

Click here 2019 - 2022 MY Avalon Avalon HV [04/2018 -        ]; LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL+

(b) Remove the headlight assembly RH.

HINT:

Use the same procedure as for the LH side.

(c) Disengage the 4 clamps.

(d) Remove the 8 bolts and front bumper reinforcement as shown in the illustration.

Remove in this Direction