Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AO0D |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: LIGHTING (EXT): LIGHTING SYSTEM (for HV Model with Cornering Light): Parking Light/Daytime Running Light Circuit; 2019 - 2022 MY Avalon HV [04/2018 - ] |
Parking Light/Daytime Running Light Circuit
|
DESCRIPTION
Parking light function:
-
When the main body ECU (multiplex network body ECU) receives the light control switch position signal, it sends an illumination request signal to the headlight ECU sub-assembly LH/RH and illuminates the parking lights.
Daytime running light function:
-
When the operation conditions of the daytime running lights are met, the main body ECU (multiplex network body ECU) sends an illumination request signal to the headlight ECU sub-assembly LH/RH and illuminates the daytime running lights.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
-
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information the headlight ECU sub-assembly LH.
Click here
-
If the headlight assembly LH has been replaced, it is necessary to synchronize the vehicle information the headlight ECU sub-assembly LH.
Click here
PROCEDURE
(a) Check the illumination of each parking lights and daytime running lights.
Result
|
Proceed to
|
LH side parking light and daytime running light does not illuminate
|
A
|
RH side parking light and daytime running light does not illuminate
|
B
|
A
|
|
|
2.
|
PERFORM ACTIVE TEST USING TECHSTREAM
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / HL AutoLeveling / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > HL AutoLeveling > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Clearance Light
|
Parking lights
|
OFF or ON
|
-
|
Daytime Running Light
|
Daytime running lights
|
OFF or ON
|
-
|
Body Electrical > HL AutoLeveling > Active Test
Tester Display
|
Clearance Light
|
Body Electrical > HL AutoLeveling > Active Test
Tester Display
|
Daytime Running Light
|
OK:
Parking lights and daytime running lights illuminate.
NG
|
|
|
3.
|
CHECK HEADLIGHT ASSEMBLY LH
|
(a) Remove each headlight ECU sub-assembly, interchange the headlight assembly LH with RH and connect the connectors.
Click here
NEXT
|
|
|
4.
|
CHECK OPERATION (PARKING LIGHTS AND DAYTIME RUNNING LIGHTS)
|
(a) Check the operation of the parking lights and daytime running lights.
OK:
The parking lights and daytime running lights operate normally.
5.
|
PERFORM ACTIVE TEST USING TECHSTREAM
|
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > HL AutoLeveling (Sub) > Active Test
Tester Display
|
Measurement Item
|
Control Range
|
Diagnostic Note
|
Clearance Light
|
Parking lights
|
OFF or ON
|
-
|
Daytime Running Light
|
Daytime running lights
|
OFF or ON
|
-
|
Body Electrical > HL AutoLeveling (Sub) > Active Test
Tester Display
|
Clearance Light
|
Body Electrical > HL AutoLeveling (Sub) > Active Test
Tester Display
|
Daytime Running Light
|
OK:
Parking lights and daytime running lights illuminate.
NG
|
|
|
6.
|
CHECK HEADLIGHT ASSEMBLY RH
|
(a) Remove each headlight ECU sub-assembly, interchange the headlight assembly RH with LH and connect the connectors.
Click here
NEXT
|
|
|
7.
|
CHECK OPERATION (PARKING LIGHTS AND DAYTIME RUNNING LIGHTS)
|
(a) Check the operation of the parking lights and daytime running lights.
OK:
The parking lights and daytime running lights operate normally.
|