| Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001AAVZ |
| Model Year Start: 2019 | Model: Avalon | Prod Date Range: [04/2018 - 08/2021] |
| Title: CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model): P057113; Brake Switch "A" Circuit Open; 2019 - 2021 MY Avalon [04/2018 - 08/2021] | ||
|
DTC |
P057113 |
Brake Switch "A" Circuit Open |
DESCRIPTION
When the brakes are applied by the dynamic radar cruise control system, the skid control ECU (brake actuator assembly) operates the stop light switch assembly (stop light control relay) to illuminate the stop lights.
If the ECM receives a stop light control relay malfunction signal from the skid control ECU (brake actuator assembly), DTC P057113 is stored.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
MIL |
|---|---|---|---|---|
|
P057113 |
Brake Switch "A" Circuit Open |
While the vehicle speed is 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, the ECM detects the stop light control relay malfunction signal from the skid control ECU (brake actuator assembly) for approximately 0.2 seconds or more. |
Pre-collision system |
Does not come on |
CAUTION / NOTICE / HINT
HINT:
When DTC P057113 is stored by the dynamic radar cruise control system, DTC C1A4B is stored by the pre-collision system. Therefore, if DTC P057113 is stored, inspect the pre-collision system first.
PROCEDURE
|
1. |
GO TO PRE-COLLISION SYSTEM |
Click here
![2019 - 2021 MY Avalon [04/2018 - 08/2021]; PRE-COLLISION: PRE-COLLISION SYSTEM (for Gasoline Model): C1A4B; Stop Light Relay Circuit](/t3Portal/stylegraphics/info.gif)
| NEXT |
|
END |
|
|