Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001AAVX |
Model Year Start: 2019 |
Model: Avalon |
Prod Date Range: [04/2018 - 08/2021] |
Title: CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model): C1A11,C1A14; Front Radar Sensor Incorrect Axial Gap; 2019 - 2021 MY Avalon [04/2018 - 08/2021] |
DTC
|
C1A11
|
Front Radar Sensor Incorrect Axial Gap
|
DTC
|
C1A14
|
Front Radar Sensor Beam Axis Not Adjusted
|
DESCRIPTION
The driving support ECU assembly uses the millimeter wave radar sensor assembly to detect objects in front of the vehicle.
When it is determined that the vehicle is being driven in a straight line or on a gradual curve based on signals from the yaw rate sensor, the millimeter wave radar sensor assembly performs self-diagnosis to check if the sensor beam axis has deviated. When the millimeter wave radar sensor assembly beam axis is misaligned, the driving support ECU assembly stores DTC C1A11.
After installing a new millimeter wave radar sensor assembly, if sensor beam axis adjustment is not performed, DTC C1A14 is stored.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
MIL
|
C1A11
|
Front Radar Sensor Incorrect Axial Gap
|
When the vehicle is being driven at a speed of 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, misalignment of the millimeter wave radar sensor assembly is detected for approximately 0.3 seconds or more.
|
Pre-collision system
|
Does not come on
|
C1A14
|
Front Radar Sensor Beam Axis Not Adjusted
|
When the vehicle is being driven at a speed of 5 km/h (3 mph) or more and the dynamic radar cruise control system is operating, incompletion of the millimeter wave radar sensor assembly beam axis alignment is detected for approximately 0.3 seconds or more.
|
Pre-collision system
|
Does not come on
|
PROCEDURE
1.
|
GO TO PRE-COLLISION SYSTEM
|
HINT:
If DTC C1A11 or C1A14 is output by the dynamic radar cruise control system, perform troubleshooting for the pre-collision system.
Click here
NEXT |
|
END
|
|