Last Modified: 08-21-2023 |
6.11:8.1.0 |
Doc ID: RM100000001A3OX |
Model Year Start: 2019 |
Model: Avalon HV |
Prod Date Range: [04/2018 -
] |
Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for HV Model): B1477; A/C Inverter Low Voltage Power Resource System; 2019 - 2022 MY Avalon HV [04/2018 - ] |
DTC
|
B1477
|
A/C Inverter Low Voltage Power Resource System
|
DESCRIPTION
The compressor with motor assembly monitors the inverter control power source voltage. The hybrid vehicle control ECU assembly stops the compressor control and stores this DTC if the monitored voltage is outside the specified range.
This DTC will be stored as a history DTC. Compressor control may not resume unless the power switch is turned off.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
Memory
|
B1477
|
A/C Inverter Low Voltage Power Resource System
|
Open or short to ground in inverter control power voltage circuit
|
Compressor with motor assembly
|
Memorized
|
CAUTION / NOTICE / HINT
CAUTION:
-
Before inspecting the high-voltage system, take safety precautions such as wearing insulated gloves and removing the service plug grip to prevent electrical shocks. After removing the service plug grip, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system.
-
Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
NOTICE:
-
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.
Click here
-
The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs for both systems are output simultaneously.
-
The air conditioning system uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting. Troubleshoot the air conditioning system after confirming that the communication systems are functioning properly.
Click here
PROCEDURE
1.
|
REPLACE COMPRESSOR WITH MOTOR ASSEMBLY
|
(a) Replace the compressor with motor assembly.
Click here
NOTICE:
As this DTC is stored when the compressor with motor assembly is malfunctioning, it is necessary to replace the compressor with motor assembly.
NEXT |
|
END
|
|