| 
                     
                        | Last Modified: 08-21-2023 | 6.11:8.1.0 | Doc ID: RM100000001A3OF |  
                        | Model Year Start: 2019 | Model: Avalon HV | Prod Date Range: [04/2018 -                    
                                       ] |  
                        | Title: HEATING / AIR CONDITIONING: AIR CONDITIONING SYSTEM (for HV Model): A/C Switch Indicator does not Turn On; 2019 - 2022 MY Avalon HV [04/2018 -        ] |  
                     
                        
                           | A/C Switch Indicator does not Turn On |  DESCRIPTIONIf none of the switch indicators on the air conditioning control panel (radio and display receiver assembly) illuminate, the following factors may be the cause. 
                     
                        
                        
                     
                     
                        
                           | Symptom | Factor |  
                           | A/C switch indicator does not illuminate | 
                                 
                                    
Air conditioning amplifier assembly malfunction
Air conditioning control panel (radio and display receiver assembly) malfunction
A/C switch malfunction
A/C switch indicator malfunction (including when indicator turned off without switch operation)
Servo motor initialization (incomplete)
Mechanical locking of damper and damper link
Refrigerant pressure is extremely low
Low detected ambient temperature (including thermistor assembly malfunction)
 |  PROCEDURE
                     
                        
                           | 1.  | CHECK MALFUNCTION STATUS |  (a) Check the malfunction status of switch indicators on the air conditioning control panel (radio and display receiver assembly). 
                     
                        
                           | Result | Proceed to |  
                           | Indicators are not always illuminated | A |  
                           | Indicators are not illuminated only immediately after starting the engine | B |  
                     
                        | 
                              
                                 | A |  
                                 |   |  |  
                     
                        
                           | 2.  | READ VALUE USING TECHSTREAM |  (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Air Conditioner / Data List. (e) Read the Data List according to the display on the Techstream. Body Electrical > Air Conditioner > Data List
                     
                        
                        
                        
                        
                        
                     
                     
                        
                           | Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |  
                           | Ambient Temp Sensor | Thermistor assembly | Min.: -23.30°C (-9.94°F) Max.: 65.95°C (150.71°F) | Actual ambient temperature displayed | Thermistor assembly circuit malfunction 
                                 
                                    
When open circuit: -23.30°C (-9.94°F)
When short circuit: 65.95°C (150.71°F)
 |  Body Electrical > Air Conditioner > Data List
                     
                        
                     
                     
                        
                           | Tester Display |  
                           | Ambient Temp Sensor |  OK:  The value displayed is 0°C (32°F) or higher. |