POWER OUTLETS (INT): WIRELESS CHARGING SYSTEM: TERMINALS OF ECU; 2022 - 2024 MY Camry HV [08/2021

TERMINALS OF ECU

CHECK MOBILE WIRELESS CHARGER CRADLE ASSEMBLY (FRONT CONSOLE BOX INSERT SUB-ASSEMBLY)

Terminal No. (Symbol)

Wiring Color

Terminal Description

Condition

Specified Condition

k2-1 (PGND) - Body ground

W-B - Body ground

Ground

Always

Below 1 V

k2-2 (ILL-) - Body ground

L - Body ground

Illumination (rheo stat) signal

Light control switch in off position

Below 1 V

Light control switch in tail or head position

Pulse generation

k2-3 (ACC) - k2-1 (PGND)

P - W-B

Power source (ACC)

Engine switch on (ACC)

11 to 14 V

Engine switch off

Below 1 V

k2-4 (B+) - k2-1 (PGND)

G - W-B

Power source (+B)

Engine switch off

11 to 14 V

k2-7 (TAIL) - Body ground

W - Body ground

Illumination signal

Light control switch in off position

Below 1 V

Engine switch off, light control switch in tail or head position

11 to 14 V

k2-8 (DIS) - Body ground

LG - Body ground

Charging suspension signal

For 5 seconds after turning engine switch from off to on (ACC)*1

4.5 to 6.0 V

Device being charged

Below 1 V

Charging suspended due to smart entry and start system status*2

4.5 to 6.0 V

*1: When the power switch is turned from off to on (ACC), the mobile wireless charger cradle assembly (front console box insert sub-assembly) monitors the charging suspension signal for 5 seconds. If the charging suspension signal is not 4 V or more for 0.8 seconds or more during monitoring, the mobile wireless charger cradle assembly (front console box insert sub-assembly) determines that there is an open in the charging suspension signal line, blinks (pattern 1) the indicator light (amber), and prohibits operation until the power switch is turned from off to on (ACC) again.
*2: For details about conditions when the certification ECU (smart key ECU assembly) sends the charging suspension signal, refer to System Description.
Click here