Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001XWSH |
Model Year Start: 2022 |
Model: Camry HV |
Prod Date Range: [08/2021 -
] |
Title: INTERIOR PANELS / TRIM: INSTRUMENT PANEL SAFETY PAD: DISASSEMBLY; 2022 - 2024 MY Camry HV [08/2021 - ] |
DISASSEMBLY
PROCEDURE
1. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY
Click here
2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT
(a) Remove the screw <C>.
|
Remove in this Direction
|
(b) Disengage the 2 guides as shown in the illustration.
(c) Disengage the claw to remove the No. 1 side defroster nozzle duct as shown in the illustration.
|
Remove in this Direction
|
3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT
(a) Remove the 2 screws <C>.
|
Remove in this Direction
|
(b) Disengage the 2 guides as shown in the illustration.
(c) Disengage the claw to remove the No. 2 side defroster nozzle duct as shown in the illustration.
|
Remove in this Direction
|
4. REMOVE DEFROSTER NOZZLE ASSEMBLY
(a) Remove the 3 screws <C> and defroster nozzle assembly.
|
|
5. REMOVE METER MIRROR SUB-ASSEMBLY (w/ Headup Display)
Click here
6. REMOVE NO. 1 HEATER TO REGISTER DUCT SUB-ASSEMBLY
(a) Remove the 2 screws <C> and No. 1 heater to register duct sub-assembly.
|
|
7. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY
(a) Remove the 2 screws <C> and No. 3 heater to register duct sub-assembly.
|
|
8. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/o Navigation System)
Click here
9. REMOVE ANTENNA CORD SUB-ASSEMBLY (w/ Navigation System)
Click here
10. REMOVE NAVIGATION ANTENNA ASSEMBLY WITH BRACKET (w/ Navigation System)
Click here
11. REMOVE TELEPHONE AND GPS ANTENNA CORD (w/ Manual (SOS) Switch)
Click here
12. REMOVE TELEPHONE AND GPS ANTENNA ASSEMBLY WITH BRACKET (w/ Manual (SOS) Switch)
Click here
13. REMOVE AUTOMATIC LIGHT CONTROL SENSOR
Click here
14. REMOVE NO. 3 INSTRUMENT PANEL WIRE
(a) Disengage the clamp to remove the No. 3 instrument panel wire.
|
|
15. REMOVE RADIO TUNER FINISH RETAINER
(a) Remove the 5 screws <C> and radio tuner finish retainer.
|
|
16. REMOVE NO. 1 METER BRACKET SUB-ASSEMBLY
(a) Remove the screw <C> and No. 1 meter bracket sub-assembly.
|
|
17. REMOVE NO. 2 METER BRACKET SUB-ASSEMBLY (w/ Headup Display)
(a) Remove the screw <C> and No. 2 meter bracket sub-assembly.
|
|
18. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH
(a) Disengage the 4 clips.
(b) Disengage the 5 guides to remove the No. 1 defroster nozzle garnish.
19. REMOVE INSTRUMENT PANEL HOLE COVER (w/ Headup Display)
(a) Disengage the 5 claws.
|
|
(b) Disengage the 3 guides to remove the instrument panel hole cover.
|
|
20. REMOVE NO. 1 INSTRUMENT PANEL PIN
(a) Remove the 4 screws <C> and 4 No. 1 instrument panel pins.
|
|
21. REMOVE INSTRUMENT PANEL CUSHION
(a) Remove the instrument panel cushion.
|
|
|