Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001TG48
Model Year Start: 2021 Model: Camry HV Prod Date Range: [10/2020 -           ]
Title: SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL; 2021 - 2024 MY Camry HV [10/2020 -        ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front seat inner belt assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replacement Part or Procedure

Necessary Procedures

Effects / Inoperative when not performed

Link

Disconnect cable from negative auxiliary battery terminal

Perform steering sensor zero point calibration

Lane Tracing Assist System

2021 - 2024 MY Camry HV [10/2020 -        ]; PRE-COLLISION: PRE-COLLISION SYSTEM: INITIALIZATION

Pre-collision System

Lighting System (w/ AFS)(EXT)

Memorize steering angle neutral point

Parking Assist Monitor System

2018 - 2024 MY Camry HV [07/2017 -        ]; PARK ASSIST / MONITORING: PARKING ASSIST MONITOR SYSTEM: INITIALIZATION

Panoramic View Monitor System

2021 - 2024 MY Camry HV [10/2020 -        ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION

Front passenger seat

Zero point calibration (Occupant classification system)
  • Occupant classification system
  • Passenger airbag ON/OFF indicator
  • Airbag system (Front passenger side)
  • Seat belt warning system (Front passenger)

2018 - 2024 MY Camry HV [07/2017 -        ]; SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION SYSTEM: INITIALIZATION

PROCEDURE

1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

Click here 2021 - 2024 MY Camry HV [10/2020 -        ]; SEAT: FRONT SEAT ASSEMBLY (for Manual Seat): REMOVAL

2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

Click here 2021 - 2024 MY Camry HV [10/2020 -        ]; SEAT: FRONT SEAT ASSEMBLY (for Power Seat): REMOVAL

3. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

(a) Disconnect each connector.

(b) Disengage each clamp.

(c) Remove the nut and front seat inner belt assembly LH.

(d) Remove the front seat belt anchor plate as shown in the illustration.

Remove in this Direction

4. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

(a) Disconnect each connector.

(b) Disengage each clamp.

(c) Remove the nut and front seat inner belt assembly RH.

(d) Remove the front seat belt anchor plate as shown in the illustration.

Remove in this Direction