|
Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001T9RF |
|
Model Year Start: 2021 |
Model: Camry HV |
Prod Date Range: [10/2020 -
] |
|
Title: EXTERIOR PANELS / TRIM: GRILLE SHUTTER: REMOVAL; 2021 - 2024 MY Camry HV [10/2020 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during radiator shutter sub-assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
Replacement or removal and installation of 2 or more parts:
-
Front television camera assembly, front bumper assembly or radiator grille
-
Rear television camera assembly
-
Side television camera assembly LH or outer rear view mirror assembly LH
-
Side television camera assembly RH or outer rear view mirror assembly RH
|
-
Television camera view adjustment
-
Rear television camera assembly optical axis (Back camera detection function)*2
|
Panoramic View Monitor System
|
![2021 - 2024 MY Camry HV [10/2020 - ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
for Initialization
for Calibration
|
|
Front bumper assembly (w/ Panoramic view monitor system)
|
Front television camera view adjustment
|
|
Radiator shutter assembly
|
Change grille shutter control mode and/or perform initialization
|
Grille Shutter system
|
|
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH
|
(a) Disengage the 2 claws to remove the front radiator side air guide plate RH.
|
|
3. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH
|
(a) Disengage the 2 claws to remove the front radiator side air guide plate LH.
|
|
4. REMOVE THERMISTOR ASSEMBLY
Click here
5. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY
|
(a) Disconnect the connector.
|
|
(b) Remove the 3 bolts.
(c) Disengage the 2 guides to remove the radiator shutter sub-assembly as shown in the illustration.
|
Remove in this Direction
|
|
