| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001T9RB |
| Model Year Start: 2021 | Model: Camry HV | Prod Date Range: [10/2020 - ] |
| Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: DISASSEMBLY; 2021 - 2024 MY Camry HV [10/2020 - ] | ||
DISASSEMBLY
PROCEDURE
1. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ Parking Support Brake System)
Click here
![2021 - 2024 MY Camry HV [10/2020 - ]; PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front): REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Parking Support Brake System)
Click here
3. REMOVE FRONT CORNER ULTRASONIC SENSOR RETAINER (w/ Parking Support Brake System)
Click here
4. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Parking Support Brake System)
(a) for Bar Type Radiator Grille:
(1) Disengage the 7 clamps to remove the No. 4 engine room wire.
(b) for Mesh Type Radiator Grille:
(1) Disengage the 12 clamps to remove the No. 4 engine room wire.
5. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Pre-collision System)
Click here
6. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the front license plate bracket sub-assembly as shown in the illustration.
|
Remove in this Direction |
7. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
(b) Disengage the 2 guides to remove the front license plate bracket sub-assembly as shown in the illustration.
|
|
Remove in this Direction |
8. REMOVE FRONT BUMPER PAD LH (for Bar Type Radiator Grille)
|
(a) Remove the front bumper pad LH. |
|
9. REMOVE FRONT BUMPER PAD RH (for Bar Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
10. REMOVE FRONT BUMPER PAD LH (for Mesh Type Radiator Grille)
|
(a) Disengage the 2 claws and guide to remove the front bumper pad LH. |
|
11. REMOVE FRONT BUMPER PAD RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
12. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
for Bar Type Radiator Grille:
Click here
13. REMOVE FRONT BUMPER COVER INSERT (w/ Panoramic View Monitor System)
(a) for Mesh Type Radiator Grille:
|
(1) Disengage the 2 claws to remove the front bumper cover insert. |
|
14. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)
for Mesh Type Radiator Grille:
Click here
15. REMOVE HOOD TO FRONT END PANEL SEAL
|
(a) Disengage the 6 clips. |
|
(b) Separate the double-sided tape and disengage the guide to remove the hood to front end panel seal.
|
Double-sided Tape |
16. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY
|
(a) Remove the screw. |
|
|
(b) Disengage the 4 claws and guide to remove the radiator grille emblem assembly. |
|
17. REMOVE FRONT BUMPER UPPER RETAINER
HINT:
Use the same procedure for the RH side and LH side.
|
(a) Remove the screw. |
|
(b) Disengage the 2 guides to remove the front bumper upper retainer.
18. REMOVE FRONT CENTER BUMPER BAR (for Bar Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
(b) Remove the 4 screws and front center bumper bar.
19. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)
|
(a) Remove the 2 screws. |
|
|
(b) Disengage the 10 claws and guide to remove the radiator grille. |
|
20. REMOVE RADIATOR GRILLE (for Mesh Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Remove the 10 screws. |
|
|
(c) Disengage the 8 claws to remove the radiator grille. |
|
21. REMOVE FRONT BUMPER SIDE MOULDING LH (for Bar Type Radiator Grille)
|
(a) Remove the 5 screws. |
|
|
(b) Disengage the 3 claws and 2 guides to remove the front bumper side moulding LH. |
|
22. REMOVE FRONT BUMPER SIDE MOULDING RH (for Bar Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
23. REMOVE FOG LIGHT COVER LH (for Mesh Type Radiator Grille)
|
(a) Remove the 4 clips. |
|
|
(b) Remove the clip. |
|
|
(c) Disengage the 6 claws to remove the fog light cover LH. |
|
24. REMOVE FOG LIGHT COVER RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
25. REMOVE LOWER RADIATOR GRILLE MOULDING LH (for Mesh Type Radiator Grille)
|
(a) Remove the screw. |
|
|
(b) Disengage the 8 claws and guide to remove the lower radiator grille moulding LH. |
|
26. REMOVE LOWER RADIATOR GRILLE MOULDING RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
27. REMOVE LOWER CENTER RADIATOR GRILLE MOULDING (for Mesh Type Radiator Grille)
|
(a) Remove the screw. |
|
(b) Disengage the 4 claws and guide to remove the lower center radiator grille moulding.
28. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)
|
(a) Remove the 4 screws. |
|
(b) Disengage the 17 claws to remove the lower radiator grille sub-assembly.
29. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)
|
(a) Remove the 4 screws. |
|
(b) Disengage the 24 claws and 6 guides to remove the lower radiator grille sub-assembly.
30. REMOVE FRONT BUMPER SIDE MOULDING LH (for Mesh Type Radiator Grille)
|
(a) Remove the 2 clips. |
|
|
(b) Disengage the 2 claws and 2 guides to remove the front bumper side moulding LH. |
|
31. REMOVE FRONT BUMPER SIDE MOULDING RH (for Mesh Type Radiator Grille)
HINT:
Use the same procedure as for the LH side.
32. REMOVE PIN HOLD CLIP
(a) Disengage the 4 claws to remove the 2 pin hold clips as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
33. REMOVE FRONT FENDER LINER RETAINER
(a) Remove the 2 front fender liner retainers as shown in the illustration.
|
|
Remove in this Direction |
HINT:
Use the same procedure for the RH side and LH side.
34. REMOVE NO. 2 FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 4 guides to remove the No. 2 front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
35. REMOVE FRONT BUMPER ENERGY ABSORBER
(a) Disengage the 2 guides to remove the front bumper energy absorber as shown in the illustration.
|
|
Remove in this Direction |
36. REMOVE FRONT BUMPER REINFORCEMENT
(a) Remove the headlight assembly LH.
Click here
(b) Remove the headlight assembly RH.
HINT:
Use the same procedure as for the LH side.
|
(c) Disengage the 5 clamps. |
|
(d) Remove the 8 bolts and front bumper reinforcement.
37. REMOVE FRONT BUMPER SIDE RETAINER LH
|
(a) Remove the bolt. |
|
(b) Disengage the 2 clips to remove the front bumper side retainer LH as shown in the illustration.
|
|
Remove in this Direction |
38. REMOVE FRONT BUMPER SIDE RETAINER RH
HINT:
Use the same procedure as for the LH side.
|
|