Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001T9BN |
Model Year Start: 2021 |
Model: Camry HV |
Prod Date Range: [10/2020 -
] |
Title: LIGHTING (EXT): SIDE TURN SIGNAL LIGHT ASSEMBLY: REMOVAL; 2021 - 2024 MY Camry HV [10/2020 - ] |
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side turn signal light assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure
|
Necessary Procedure
|
Effect/Inoperative Function when Necessary Procedure not Performed
|
Link
|
-
Side television camera assembly LH
-
Outer rear view mirror assembly LH
-
Side television camera assembly RH
-
Outer rear view mirror assembly RH
|
Side television camera view adjustment
|
Panoramic View Monitor System
|
|
Replacement or removal and installation of 2 or more parts:
-
Front television camera assembly, front bumper assembly or radiator grille
-
Rear television camera assembly
-
Side television camera assembly LH or outer rear view mirror assembly LH
-
Side television camera assembly RH or outer rear view mirror assembly RH
|
Television camera view adjustment
|
HINT:
-
Use the same procedure for the RH side and LH side.
-
The following procedure is for the LH side.
PROCEDURE
1. REMOVE OUTER MIRROR (for Type A)
Click here
2. REMOVE OUTER MIRROR COVER WITH OUTER MIRROR HOLE COVER (for Type A)
w/o Panoramic View Monitor System:
Click here
3. REMOVE OUTER MIRROR COVER (for Type A)
Click here
4. REMOVE OUTER MIRROR HOLE COVER WITH SIDE TELEVISION CAMERA ASSEMBLY (for Type A)
w/ Panoramic View Monitor System:
Click here
5. REMOVE OUTER MIRROR (for Type B)
Click here
6. REMOVE OUTER MIRROR COVER (for Type B)
Click here
7. REMOVE VISOR HOUSING (for Type B)
Click here
8. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY
(a) for Type A:
(1) Disengage the 2 claws.
|
|
(2) Disengage the 2 guides to separate the side turn signal light assembly.
|
|
(3) Disconnect the connector to remove the side turn signal light assembly.
|
|
(b) for Type B:
(1) Disconnect the connector to remove the side turn signal light assembly.
|
|
|