Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001T81T
Model Year Start: 2021 Model: Camry HV Prod Date Range: [10/2020 -           ]
Title: AUDIO / VIDEO: AUDIO AND VISUAL SYSTEM: Radio Receiver Power Source Circuit; 2021 - 2024 MY Camry HV [10/2020 -        ]

Radio Receiver Power Source Circuit

DESCRIPTION

This is the power source circuit to operate the radio and display receiver assembly.

WIRING DIAGRAM

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.

PROCEDURE

1.

CHECK HARNESS AND CONNECTOR (RADIO AND DISPLAY RECEIVER ASSEMBLY POWER SOURCE)

(a) Disconnect the K3 and K2 radio and display receiver assembly connectors.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

K3-1 (GND1) - Body ground

Always

Below 1 Ω

(c) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Tester Connection

Condition

Specified Condition

K3-4 (+B1) - K3-1 (GND1)

Power switch off

11 to 14 V

K3-15 (ACC1) - K3-1 (GND1)

Power switch on (ACC)

11 to 14 V

K2-19 (IG) - K3-1 (GND1)

Power switch on (IG)

11 to 14 V

OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR