Last Modified: 11-20-2023 |
6.11:8.1.0 |
Doc ID: RM100000001T5J6 |
Model Year Start: 2021 |
Model: Camry HV |
Prod Date Range: [10/2020 -
] |
Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: U0073,U0265,U1110; Control Module Communication Bus Off; 2021 - 2024 MY Camry HV [10/2020 - ] |
DTC
|
U0073
|
Control Module Communication Bus Off
|
DTC
|
U0265
|
Lost Communication with Image Processing Sensor A
|
DTC
|
U1110
|
Lost Communication with Clearance Warning ECU
|
DESCRIPTION
These DTCs are stored if there is a malfunction in the CAN communication system connected to the television camera controller.
HINT:
If CAN communication system DTCs are stored, they may also be stored in other systems.
DTC No.
|
Detection Item
|
DTC Detection Condition
|
Trouble Area
|
U0073
|
Control Module Communication Bus Off
|
Control module communication bus off
|
CAN communication system
|
U0265
|
Lost Communication with Image Processing Sensor A
|
Lost Communication with rear television camera assembly
|
CAN communication system
|
U1110
|
Lost Communication with Clearance Warning ECU
|
Lost communication with clearance warning ECU assembly
|
CAN communication system
|
PROCEDURE
(a) Clear the DTCs.
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Check for DTCs.
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
Result
|
Proceed to
|
DTCs are output
|
A
|
No DTCs are output
|
B
|
HINT:
-
If CAN communication system DTCs are stored, they may also be stored in other systems.
-
If the CAN communication system has been inspected and repaired in other systems, the DTCs will not be output when rechecking for DTCs.
-
If these DTCs are output frequently, duplicate the conditions that cause the problem symptoms and perform troubleshooting again, even if the DTC was not output when rechecking for DTCs.
Click here
|