| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001T5J4 |
| Model Year Start: 2021 | Model: Camry HV | Prod Date Range: [10/2020 - ] |
| Title: PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: C2A63; Back Camera Internal Circuit; 2021 - 2024 MY Camry HV [10/2020 - ] | ||
|
DTC |
C2A63 |
Back Camera Internal Circuit |
DESCRIPTION
This DTC is stored when the television camera controller detects a signal indicating a malfunction in the rear television camera assembly via CAN communication.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
C2A63 |
Back Camera Internal Circuit |
A signal indicating a malfunction in the rear television camera assembly is detected. |
Rear television camera assembly |
CAUTION / NOTICE / HINT
NOTICE:
-
When "!" is displayed on the radio and display receiver assembly after the cable is disconnected from the negative (-) auxiliary battery terminal, correct the steering angle neutral point.
Click here
![2021 - 2024 MY Camry HV [10/2020 - ]; PARK ASSIST / MONITORING: PANORAMIC VIEW MONITOR SYSTEM: INITIALIZATION](/t3Portal/stylegraphics/info.gif)
-
Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the panoramic view monitor system may be needed.
Click here
PROCEDURE
|
1. |
CHECK FOR DTC |
(a) Clear the DTCs.
Chassis > Circumference Monitoring Camera Control Module > Clear DTCs
(b) Check for DTCs.
Chassis > Circumference Monitoring Camera Control Module > Trouble Codes
OK:
DTC C2A63 is not output.
| OK |
|
END |
| NG |
|
|
|