- Side television camera assembly LH
- Side television camera assembly RH
| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001T5H8 |
| Model Year Start: 2021 | Model: Camry HV | Prod Date Range: [10/2020 - ] |
| Title: PARK ASSIST / MONITORING: TELEVISION CAMERA (for Side): REMOVAL; 2021 - 2024 MY Camry HV [10/2020 - ] | ||
REMOVAL
CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side television camera assembly removal/installation are shown below.
Necessary Procedure After Parts Removed/Installed/Replaced
|
Replaced Part or Performed Procedure |
Necessary Procedure |
Effect/Inoperative Function when Necessary Procedure not Performed |
Link |
|---|---|---|---|
| *1: Applies only for when removing and installing or replacing the rear television camera assembly. | |||
|
|
Side television camera view adjustment |
Panoramic View Monitor System |
|
Replacement or removal and installation of 2 or more parts:
|
|
Panoramic View Monitor System |
|
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.
PROCEDURE
1. REMOVE OUTER MIRROR
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; MIRROR (EXT): OUTER REAR VIEW MIRROR GLASS: REMOVAL+](/t3Portal/stylegraphics/info.gif)
2. REMOVE OUTER MIRROR COVER
Click here
3. REMOVE OUTER MIRROR HOLE COVER WITH SIDE TELEVISION CAMERA ASSEMBLY
Click here
4. REMOVE SIDE TELEVISION CAMERA ASSEMBLY
|
(a) Disengage the 2 guides. |
|
|
(b) Remove the screw. |
|
(c) Disengage the claw to remove the side television camera assembly from the outer mirror hole cover assembly.
|
|