Last Modified: 11-20-2023 6.11:8.1.0 Doc ID: RM100000001T5GS
Model Year Start: 2021 Model: Camry HV Prod Date Range: [10/2020 -           ]
Title: PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: C1AE496; Ultrasonic Sensor (Front Right Corner) Component Internal Failure; 2021 - 2024 MY Camry HV [10/2020 -        ]

DTC

C1AE496

Ultrasonic Sensor (Front Right Corner) Component Internal Failure

DESCRIPTION

The front corner ultrasonic sensor RH is installed on the front bumper. The clearance warning ECU assembly detects obstacles based on signals it receives from the front corner ultrasonic sensor RH. If an open circuit or other malfunction occurs in the front corner ultrasonic sensor RH, the front corner ultrasonic sensor RH does not operate correctly.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AE496

Ultrasonic Sensor (Front Right Corner) Component Internal Failure

Front corner ultrasonic sensor RH failure

  • Front corner ultrasonic sensor RH
  • Clearance warning ECU assembly

CAUTION / NOTICE / HINT

NOTICE:

  • Perform registration after replacing or removing and installing the ultrasonic sensor or clearance warning ECU assembly.

    Click here 2021 - 2024 MY Camry HV [10/2020 -        ]; PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: CALIBRATION

  • If a DTC is detected again after the repair, turn the ignition switch to ON and turn the intuitive parking assist system on, and then clear the DTC.

    Click here 2021 - 2024 MY Camry HV [10/2020 -        ]; PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: DTC CHECK / CLEAR

PROCEDURE

1.

CHECK FOR DTC

(a) According to the display on the GTS, check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes

(b) According to the display on the GTS, clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs

(c) Recheck for DTCs.

Body Electrical > Clearance Warning > Trouble Codes

Result

Proceed to

No DTC is output

A

"C1AE496" is output

B

"C1AE496" and "C1AE487" are output

C

A

USE SIMULATION METHOD TO CHECK 2021 MY Camry HV [10/2020 - 08/2021]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING 2022 - 2024 MY Camry HV [08/2021 -        ]; INTRODUCTION: HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS: HOW TO PROCEED WITH TROUBLESHOOTING

C

GO TO OTHER FLOWCHART (C1AE487)

B

2.

REPLACE FRONT CORNER ULTRASONIC SENSOR RH

(a) Replace the front corner ultrasonic sensor RH with a new or normally functioning one.

Click here 2021 - 2024 MY Camry HV [10/2020 -        ]; PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front): REMOVAL

HINT:

To check if the ultrasonic sensor is functioning correctly, replace it with another ultrasonic sensor.

NEXT

3.

CHECK FOR DTC

(a) According to the display on the GTS, check for DTCs.

Body Electrical > Clearance Warning > Trouble Codes

(b) According to the display on the GTS, clear the DTCs.

Body Electrical > Clearance Warning > Clear DTCs

(c) Recheck for DTCs.

Body Electrical > Clearance Warning > Trouble Codes

Result

Proceed to

No DTC is output

A

"C1AE496" is output

B

A

END (FRONT CORNER ULTRASONIC SENSOR RH WAS DEFECTIVE)

B

REPLACE CLEARANCE WARNING ECU ASSEMBLY