HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: REMOVAL; 2021 - 2024 MY Camry HV [10/2020

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM100000001T4VW
Model Year Start: 2021	Model: Camry HV	Prod Date Range: [10/2020 - ]
Title: HEATING / AIR CONDITIONING: FRONT EVAPORATOR TEMPERATURE SENSOR: REMOVAL; 2021 - 2024 MY Camry HV [10/2020 - ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during No. 1 cooler thermistor removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
Disconnect cable from negative auxiliary battery terminal	Perform steering sensor zero point calibration	Lane Tracing Assist System
		Pre-collision System
		Lighting System (w/ AFS)(EXT)
	Memorize steering angle neutral point	Parking Assist Monitor System
	Memorize steering angle neutral point	Panoramic View Monitor System
Steering sensor	Steering angle neutral point (Initialize parking assist monitor system) Steering angle setting	Parking Assist Monitor System	for Initialization for Calibration

CAUTION:

Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing.

Click here

PROCEDURE

1. REMOVE BLOWER ASSEMBLY

Click here

2. REMOVE AIR CONDITIONING HARNESS ASSEMBLY

Click here

3. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

Click here

4. REMOVE HEATER PIPE GROMMET

Click here

5. REMOVE HEATER CLAMP

Click here

6. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

Click here

7. REMOVE GROMMET SUB-ASSEMBLY

Click here

8. REMOVE COOLER EXPANSION VALVE

Click here

9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

Click here

10. REMOVE NO. 1 COOLER THERMISTOR

(a) Remove the No. 1 cooler thermistor.