| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001SB1Y |
| Model Year Start: 2021 | Model: Camry HV | Prod Date Range: [10/2020 - ] |
| Title: CELLULAR COMMUNICATION: DCM(TELEMATICS TRANSCEIVER): INSTALLATION; 2021 - 2024 MY Camry HV [10/2020 - ] | ||
INSTALLATION
PROCEDURE
1. INSTALL DCM (TELEMATICS TRANSCEIVER)
2. INSTALL NAVIGATION ECU (w/ Navigation System)
3. INSTALL NO. 1 TELEPHONE BRACKET
(a) w/o Navigation System:
(1) Install the No. 1 telephone bracket with the screw.
(b) w/ Navigation System:
(1) Install the No. 1 telephone bracket with the 3 screws.
4. INSTALL NO. 2 TELEPHONE BRACKET
(a) w/o Navigation System:
(1) Install the No. 2 telephone bracket with the screw.
(b) w/ Navigation System:
(1) Install the No. 2 telephone bracket with the 3 screws.
5. INSTALL ANTENNA CORD SUB-ASSEMBLY
(a) w/o Navigation System:
(1) Engage the clamp to install the antenna cord sub-assembly.
(2) Connect the 3 connectors.
(b) w/ Navigation System:
(1) Engage the clamp to install the antenna cord sub-assembly.
(2) Connect the 4 connectors.
6. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET
(a) Connect each connector.
(b) Engage the clamp.
(c) Engage the 3 guides.
(d) Install the DCM (telematics transceiver) with bracket with the 3 bolts.
(e) Connect each connector.
7. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY
Click here
![2018 - 2024 MY Camry HV [07/2017 - ]; INTERIOR PANELS / TRIM: FRONT CONSOLE BOX: INSTALLATION+](/t3Portal/stylegraphics/info.gif)
8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
9. INSTALL SHIFT LOCK RELEASE BUTTON COVER
Click here
10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
11. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH
Click here
12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
Click here
13. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 7 Inch Display)
Click here
14. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for 9 Inch Display)
Click here
15. INSTALL AIR CONDITIONING CONTROL ASSEMBLY
Click here
16. PERFORM DCM ACTIVATION
HINT:
After replacing the DCM (telematics transceiver), make sure to perform DCM activation.
Click here
17. PERFORM REGISTRATION
for Toyota Entune Remote Connect Compatible Type:
HINT:
After replacing the DCM (telematics transceiver), make sure to perform code registration (Smart key System (for Start Function)).
Click here
|
|