PARK ASSIST / MONITORING: TELEVISION CAMERA (for Front): REMOVAL; 2021 - 2024 MY Camry HV [10/2020 - ]

Last Modified: 11-20-2023	6.11:8.1.0	Doc ID: RM100000001SB15
Model Year Start: 2021	Model: Camry HV	Prod Date Range: [10/2020 - ]
Title: PARK ASSIST / MONITORING: TELEVISION CAMERA (for Front): REMOVAL; 2021 - 2024 MY Camry HV [10/2020 - ]

REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front television camera assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure	Necessary Procedure	Effect/Inoperative Function when Necessary Procedure not Performed	Link
*1: Applies only for when removing and installing or replacing the rear television camera assembly.
Front television camera assembly	Front television camera view adjustment	Panoramic View Monitor System
Front bumper assembly	Measurement of ultrasonic sensor detection angle Ultrasonic sensor detection angle registration	Parking Support Brake System Intuitive Parking Assist System
Replacement or removal and installation of 2 or more parts: Front television camera assembly, front bumper assembly or radiator grille Rear television camera assembly Side television camera assembly LH or outer rear view mirror assembly LH Side television camera assembly RH or outer rear view mirror assembly RH	Television camera view adjustment Rear television camera assembly optical axis (Back camera detection function)*1	Panoramic View Monitor System

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here

2. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (for Bar Type Radiator Grille)

(a) Disconnect the connector.

(b) Remove the 2 screws.

(c) Disengage the 2 guides to remove the front television camera assembly.

3. REMOVE FRONT BUMPER COVER INSERT (for Mesh Type Radiator Grille)

Click here

4. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (for Mesh Type Radiator Grille)

(a) Disconnect the connector.

(b) Remove the 3 screws.

(c) Disengage the 2 guides to remove the front television camera assembly.