| Last Modified: 11-20-2023 | 6.11:8.1.0 | Doc ID: RM100000001RX1T |
| Model Year Start: 2021 | Model: Camry HV | Prod Date Range: [10/2020 - ] |
| Title: CRUISE CONTROL: FRONT CAMERA SYSTEM: U032257; Software Incompatibility with Body Control Module Invalid/Incompatible Software Component; 2021 - 2024 MY Camry HV [10/2020 - ] | ||
|
DTC |
U032257 |
Software Incompatibility with Body Control Module Invalid/Incompatible Software Component |
DESCRIPTION
The forward recognition camera receives vehicle information from the main body ECU (multiplex network body ECU) via CAN communication.
DTC U032257 is stored when the vehicle information from the main body ECU (multiplex network body ECU) and that stored in the forward recognition camera do not match.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
|
U032257 |
Software Incompatibility with Body Control Module Invalid/Incompatible Software Component |
The vehicle information from the main body ECU (multiplex network body ECU) and that stored in the forward recognition camera do not match. |
|
CAUTION / NOTICE / HINT
NOTICE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle. As a result, a DTC may be stored.
-
When the forward recognition camera is replaced with a new one or the windshield glass is replaced or removed/installed, make sure to read Before Starting Adjustment, then perform optical axis alignment for the forward recognition camera and clear the vehicle control history for each system.
HINT:
Forward recognition camera axis alignment can be performed by using either One Time Recognition, Sequential Recognition or Driving Adjustment.
One Time Recognition: Click here
![2021 - 2024 MY Camry HV [10/2020 - ]; CRUISE CONTROL: FRONT CAMERA: TARGET ADJUSTMENT(ONE TIME RECOGNITION)](/t3Portal/stylegraphics/info.gif)
Sequential Recognition: Click here
Driving Adjustment: Click here
-
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Click here
PROCEDURE
|
1. |
CHECK FOR DTCs |
(a) Check for DTCs.
Body Electrical > Front Radar Sensor > Trouble Codes
|
Result |
Proceed to |
|---|---|
|
Front radar sensor system DTC U030557 is not output |
A |
|
Front radar sensor system DTC U030557 is output |
B |
| A |
|
| B |
|
|
|