Title: CRUISE CONTROL: FRONT CAMERA SYSTEM: TERMINALS OF ECU; 2021 - 2024 MY Camry HV [10/2020 - ]
TERMINALS OF ECU
NOTICE:
DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the Techstream once the inspection has been completed.
Do not apply excessive force to the forward recognition camera connector.
*A
Before Nov. 2021 Production
*B
From Nov. 2021 Production
CHECK FORWARD RECOGNITION CAMERA
(a) Measure the voltage and resistance according to the value(s) in the table below.
Before Nov. 2021 Production
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
V6-1 (HTR) - V6-10 (GND)
LA-B - W-B
Forward recognition with heater hood sub-assembly operation signal
Power switch on (IG), forward recognition with heater hood sub-assembly not operating
11 to 14 V
Power switch on (IG), forward recognition with heater hood sub-assembly operating
Below 1 V
V6-7 (IGB) - V6-10 (GND)
LA-P - W-B
Power source
Power switch on (IG)
11 to 14 V
Power switch off
Below 1 V
V6-10 (GND) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
From Nov. 2021 Production
Terminal No. (Symbol)
Wiring Color
Terminal Description
Condition
Specified Condition
V21-1 (HTR) - V21-10 (GND)
LA-B - W-B
Forward recognition with heater hood sub-assembly operation signal
Power switch on (IG), forward recognition with heater hood sub-assembly not operating
11 to 14 V
Power switch on (IG), forward recognition with heater hood sub-assembly operating